The universal birch plywood sheet for smooth concrete surfaces

DokaPly Birch SC 21mm is a birchwood-veneer plywood sheet with 120 g/m² film coating on both sides, for horizontal and vertical formwork applications subject to ultra-high requirements for the concrete surfaces.

N.º art. 229

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

N.º art. 022

N.º art. 899900008

N.º art. 185311500

Plywood sheet made of Vietnamese acacia with film coating on both sides.

N.º art. 185341000

Plywood sheet made of Chinese poplar veneer with composed deck Veneers. Both sides are coated with 120 g/m² brown phenolic-resin film. Bonding is exterior and will pass a 24 h boiling test.

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

N.º art. 019

N.º art. 185019000

Water-repellent one-component paint for sealing cut faces and drilled holes in formwork sheets.

Eucalyptus veneer plywood panel with film coating on both sides for horizontal and vertical formwork applications.

N.º art. 857

N.º art. 185061500

Plywood sheet made of South American pine. The sheet has no coating or edge sealing.

N.º art. 720073034

N.º art. 720073062

N.º art. 701

N.º art. 720073031