Ledgers are used as horizontals to connect standards and to transfer loads from platforms into standards. Ledgers are also used for making side protection of the scaffold. Ledgers are available in lengths 0.15m, 0.39m, 0.73m, 1.04m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 549

Infill planks with 19cm are designed to fill any unwanted gaps between planks or bays providing a continuous working platform. They are available in the sizes of the most common bays: 0.65m, 0,88m, 1.065m, 1.57m, 2.13m, 2.43m, 3.05m.

Art.-No. 556

Steel plans are used to create a working platform in a scaffold. They are placed directly onto the ledgers and secured with the integrated lift-out guard. Steel planks are available with two widths 0.19m and 0.32m and in lengths 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 557

Steel planksare used to create a working platform in a scaffold. They are placed directly onto the ledgers and secured with the integrated lift-out guard. Steel planks are available with two widths 0.19m and 0.32m and in lengths 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 559

Steel toe boards are mounted on working platforms to prevent material from falling down. These Toeboards are galvanized and not yellow.

Art.-No. 561

Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 572

Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 573

Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 574

The Xlife panel DokaXlight is a high-quality

plastic-wood composite panel with a resistant plastic coating for a significantly longer service life and a consistently

uniform concrete finish in the wall area.

Art.-No. 579

The Xlife panel DokaXlight is a high-quality

plastic-wood composite panel with a resistant plastic coating for a significantly longer service life and a consistently

uniform concrete finish in the wall area.

Art.-No. 580

The Xlife panel Framax is a high-quality

plastic-wood composite panel with a resistant plastic coating for a significantly longer service life and a consistently

uniform concrete finish.

Art.-No. 581

Art.-No. 582

The Xlife panel Framax is a high-quality

plastic-wood composite panel with a resistant plastic coating for a significantly longer service life and a consistently

uniform concrete finish.

Art.-No. 583

The Xlife panel Framax is a high-quality

plastic-wood composite panel with a resistant plastic coating for a significantly longer service life and a consistently

uniform concrete finish.

Art.-No. 584

The Xlife panel Framax is a high-quality

plastic-wood composite panel with a resistant plastic coating for a significantly longer service life and a consistently

uniform concrete finish.

Art.-No. 586

The Xlife panel Framax is a high-quality

plastic-wood composite panel with a resistant plastic coating for a significantly longer service life and a consistently

uniform concrete finish.

Art.-No. 587

The Xlife Frami panel is a high-quality plastic-wood composite panel with a durable

plastic coating for a significantly

longer service life and a consistently uniform concrete appearance on walls.

Art.-No. 588

Closure between the panels.

Art.-No. 602

Corner element for forming right-angle outside corners.

Art.-No. 607

The high-quality formwork beam with a solid-web design

Protected, resistant, long-lasting – The Doka H20 pro N beam is a high-quality formwork beam in solid-web design with with a three-ply sheet web that can be used in wall and slab formwork systems. Its moulded-on polyurethane beam-end caps extend its usable lifespan and make it an everyday helper on any jobsite.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 611