Der widerstandsfähige Schalungsträger in Vollwandkonstruktion

Hochwertig, robust, langlebig – Der Doka-Träger H20 top P ist ein widerstandsfähiger Vollwandträger mit einem Steg aus Spezial-Flachpressplatte, der in Wand- und Deckenschalungssystemen eingesetzt werden kann. Die innovative Endverstärkung aus Polyurethan reduziert Beschädigungen und garantiert eine bis zu dreifach längere Lebensdauer.

Réf. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Réf. 004

The Doka formwork sheet 3-SO is a high-grade three-ply solid-wood sheet with urea-melamine resin coating on both sides for horizontal and vertical formwork applications.

Réf. 006

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Réf. 019

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Réf. 022

The Doka Floor prop Eurex 20 top has an integrated impact protector for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 20 kN at any extension length and corresponds to prop class D, B/D or C/D according to EN 1065.

Réf. 024

The Doka Floor prop Eurex 30 top has an integrated impact protector (except for length 550) for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 30 kN at any extension length and corresponds to prop class C/E according to EN 1065.

Réf. 025

The floor prop with high load capacity and safe handling

The tested quality prop Eurex 20 eco from Doka is characterised by a high minimum load capacity of 20 kN and corresponds to prop class B/D in accordance with standard EN 1065. The steel props also impress with their simple and safe handling and their impressive price-performance ratio.

Réf. 026

Floor prop for heavy slab loads.

Réf. 028

Self-cleaning threadbar

Réf. 029

Self-cleaning threadbar

Réf. 030

Self-cleaning threadbar

Réf. 032

Self-cleaning threadbar

Réf. 033

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Réf. 035

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Réf. 036

Forming right-angled outside corners, stop-ends and column formwork.

Réf. 037

Forming right-angled inside corners.

Réf. 038

Forming right-angled inside corners.

Réf. 039

Forming right-angled outside corners.

Réf. 040

Bracing gangforms, infills and corners and forming stop-ends.

Réf. 041