Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

English additional description

Réf. 003

The tried-and-tested formwork beam in solid-web design.

High-quality, hard-wearing, durable – The Doka beam H20 eco P is a dimensionally stable solid wall beam with a web made of special flat-pressed sheet and proven end-reinforcement by bevelling the beam ends and an extra plastic rivet in the beam chord. The beam can be used in wall and slab formwork systems.

Réf. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Réf. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Réf. 008

The robust birch plywood sheet for smooth exposed concrete surfaces

DokaPly Birch DC 21mm is a birchwood-veneer plywood sheet with 220 g/m² film coating on both sides, for horizontal and vertical formwork applications subject to ultra-high requirements for the concrete surfaces.

Réf. 022

Doka-Deckenstützen Eurex 20 top sind extrarobuste Baustützen aus Stahl mit Ausziehvorrichtung, entsprechend EN 1065. Sie dienen als vertikale Stützen für temporäre Konstruktionen und zeichnen sich durch die konstant hohe Tragkraft von 20 kN bei jeder Auszugslänge sowie den Schlag-Protektor aus.

Réf. 024

Self-cleaning threadbar

Réf. 029

Expendable form-tie distance tube for retrievable form ties at waterproof form-tie points.

Réf. 031

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Réf. 035

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Réf. 036

Forming right-angled outside corners, stop-ends and column formwork.

Réf. 037

Forming right-angled inside corners.

Réf. 038

Forming right-angled outside corners.

Réf. 040

Bracing gangforms, infills and corners and forming stop-ends.

Réf. 041

Steel tube with wall thickness of 3.2 mm.

Réf. 042

Grating for safety barriers on the formwork or on the structure.

Réf. 043

Tapered form tie, operated from one side only, for Framed formwork Framax Xlife plus.

Réf. 046

Forming acute-angle and obtuse-angle inside corners.

Réf. 048

Forming acute-angle and obtuse-angle outside corners.

Réf. 049

Forming round structures in polygon shape.

Réf. 050