The tried-and-tested formwork beam in solid-web design

High-quality, hard-wearing, durable – The Doka beam H20 eco P is a dimensionally stable solid wall beam with a web made of special flat-pressed sheet and proven end-reinforcement by bevelling the beam ends and an extra plastic rivet in the beam chord. The beam can be used in wall and slab formwork systems.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 005

The high-performance quality sheet for special requirements and many uses

The Doka formwork sheet 3-SO is a high-grade three-ply solid-wood sheet with urea-melamine resin coating on both sides for horizontal and vertical formwork applications. It offers first-class concrete results due to selected wood quality and excellent surface finishing.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 007

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 009

The floor prop with high load capacity and safe handling

The tested quality prop Eurex 20 eco from Doka is characterised by a high minimum load capacity of 20 kN and corresponds to prop class B/D in accordance with standard EN 1065. The steel props also impress with their simple and safe handling and their impressive price-performance ratio.

Art.-No. 026

Telescopic steel prop.

Art.-No. 027

Self-cleaning threadbar

Art.-No. 029

Self-cleaning threadbar

Art.-No. 030

Art.-No. 580470000

Erecting safety railings at exposed outer edges.

Art.-No. 580914000

Pressure sprayer for Doka release agents.

Art.-No. 583011000

Storage and transport device for small items

Art.-No. 581448000

Tightening and loosening cone screws.

Art.-No. 581692000

Securing cantilever positioning cones when it is not possible to drill through the formwork sheeting.

Art.-No. 586151000

Storage and transport device.

Art.-No. 581896000

Expendable form-tie component for single-sided tying.

Art.-No. 581951000

Lost form-tie distance tube for retrievable form ties.

Art.-No. 581961000

Connector in use with anchor plates and tie rods.

Art.-No. 581966000

Connector with captive support plate used with tie rods.

Art.-No. 581981000

Force-transmitting connection between tie rods.

Art.-No. 581984000

Expendable form-tie component for single-sided tying.