The stress-resistant formwork beam in solid-web design

High-quality, robust, long-lasting – The Doka H20 top N beam is a durable formwork beam in solid-web design with with a three-ply sheet web that can be used in wall and slab formwork systems. The innovative polyurethane beam-end caps reduce damage and guarantee a service life that is up to three times longer.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Арт. 002

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Арт. 004

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Арт. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Note: For fast shipping, currently only available in the sizes 200/50cm 250/50cm and 100/50cm

Арт. 007

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Арт. 008

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Арт. 009

High-grade plywood sheet made of Nordic birch with polypropylene coating on both sides, on the concrete facing side with glass-fibre reinforcing. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 2-component edge protection varnish.

Арт. 018

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Арт. 019

Izjemno trpežen teleskopski kovinski podpornik z zaščito pred udarci.

Robusten podpornik Eurex 20 top z dolgo življenjsko dobo prepriča z zagotovljeno nosilnostjo 20 kN ter se uporablja kot navpični podporniki pri začasnih konstrukcijah. Integrirano udarno varovalo zanesljivo ščiti zunanjo cev pred mehanskimi poškodbami in bistveno podaljša življenjsko dobo jeklenega podpornika.

Арт. 024

The Doka Floor prop Eurex 30 top has an integrated impact protector (except for length 550) for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 30 kN at any extension length and corresponds to prop class C/E according to EN 1065.

Арт. 025

Doka floor props Eurex eco are adjustable telescopic steel props that conform to EN 1065.
They are designed for use as vertical props for temporary structures.

Арт. 026

Floor prop for heavy slab loads.

Арт. 028

Self-cleaning threadbar

Арт. 029

Self-cleaning threadbar

Арт. 030

Expendable form-tie distance tube for retrievable form ties at waterproof form-tie points.

Арт. 031

Self-cleaning threadbar

Арт. 032

Self-cleaning threadbar

Арт. 033

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Арт. 035

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Арт. 036

Forming right-angled outside corners, stop-ends and column formwork.

Арт. 037