The tried-and-tested formwork beam in solid-web design.

High-quality, hard-wearing, durable – The Doka beam H20 eco P is a dimensionally stable solid wall beam with a web made of special flat-pressed sheet and proven end-reinforcement by bevelling the beam ends and an extra plastic rivet in the beam chord. The beam can be used in wall and slab formwork systems.

Art.-No. 005

Art.-No. 586294000

Set-up aid for floor props.

Art.-No. 026

The Doka Floor prop Eurex 20 top has an integrated impact protector for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 20 kN at any extension length and corresponds to prop class D, B/D or C/D according to EN 1065.

Art.-No. 024

Art.-No. 586155500

For securing floor props

Art.-No. 586174000

Floor-prop head for supporting and stabilising Doka formwork beams, with integral quick-lowering feature.

Art.-No. 586170000

Floor-prop head for supporting and stabilising Doka formwork beams.

Art.-No. 582528000

Connection resistant to tensile and compressive forces to secure profiles telescoped into each other.

Art.-No. 586179000

Securing intermediate props to prevent toppling.

Art.-No. 586149000

In combination with Beam forming support 20, adapting to the height of drop beams and slab stop-ends.

Art.-No. 586148000

Supporting side formwork of drop beams and slab stop-ends.

Art.-No. 580470000

Erecting safety railings at exposed outer edges.

Art.-No. 584386000

Pushed into the fresh concrete, screw-in socket for the Handrail post 1.10m.

Package size: 100 pcs.

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 008

Cost-effective and lightweight, the Doka beam H20 basic P is a solid-web beam with its low weight and proven end reinforcement in the form of bevelled beam ends. (EN 13377-compliant).

Art.-No. 162

The Doka Floor prop Eurex 20 basic impresses with a weight advantage of up to 4 kg compared to conventional floor props of class B/D according to EN 1065, and at a constant minimum load capacity of 20 kN for any extension length. The special thread geometry also allows the adjusting nut to be released smoothly even under high load.

Art.-No. 682