Telescopic steel prop.

Art.-No. 027

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 009

High-grade plywood sheet made of Nordic birch with 120 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-No. 015

High-grade plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-No. 016

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Art.-No. 019

The Doka floor prop Eurex 20 eco offers consistently high load capacity of at least 20 kN at any extension length and combines this with particularly easy and safe handling. As a steel floor prop of class B/D according to EN 1065, it is versatile and flexible for all common applications.

Art.-No. 026

Self-cleaning threadbar

Art.-No. 032

Bracing gangforms, infills and corners and forming stop-ends.

Art.-No. 041

Grating for safety barriers on the formwork or on the structure.

Art.-No. 043

Bracing gangforms, infills and corners and forming stop-ends.

Art.-No. 075

Infilling along edges and around columns.

Art.-No. 079

Post for safety barriers on the formwork or on the structure.

Art.-No. 089

For load transfer, keeps the Doka formwork beams in position and gives the formwork panel stability and rigidity.

Art.-No. 095

Art.-No. 581120000

Lost form-tie component for single-sided formwork tying.

Art.-No. 581420000

Connector in use with anchor plates and tie rods.

Art.-No. 581424000

Connector with captive support plate used with tie rods.

Art.-No. 581450000

Expendable form-tie component for single-sided tying.

Art.-No. 581692000

Securing cantilever positioning cones when it is not possible to drill through the formwork sheeting.

Art.-No. 586151000

Storage and transport device.

Art.-No. 581961000

Connector in use with anchor plates and tie rods.