Art.nr. 586239000

Making a slab stop-end.

Art.nr. 588180000

For sealing off the unneeded anchoring sleeves in the frame profile.

Pakketgrootte: 100 stuks.

Art.nr. 588181000

For sealing the unneeded form-tie holes in the formwork sheet of the universal panel.

Pakketgrootte: 100 stuks.

Art.nr. 588234000

Secures the stacked panels to prevent slippage.

Pakketgrootte: 1.000 stuks.

Art.nr. 588444000

For sealing off the unneeded form-tie holes in the frame profile.

Pakketgrootte: 100 stuks.

Art.nr. 588445000

For sealing the unneeded form-tie holes in the formwork sheet of the universal panel.

Pakketgrootte: 100 stuks.

Art.nr. 588631000

Attachment for plumbing accessories.

Pakketgrootte: 10 stuks.

Art.nr. 588633000

Lost spreader element for the re-usability of the Doka Express anchor.

Pakketgrootte: 100 stuks.

Art.nr. 586456000

Making safety barriers on the structure or on the formwork.

Art.nr. 580460000

For raising, repositioning and laying down timber-beam formwork.

Art.nr. 584373000

Very versatile edge protection. Used with Dokamatic edge tables, bridge edge beam formwork, etc.

Art.nr. 586258000

Installation of the Doka floor end-shutter clamp.

Art.nr. 586257000

Installation of the Doka floor end-shutter clamp.

Art.nr. 586478000

Making safety barriers on the formwork.

Cost-effective and lightweight, the Doka beam H20 basic P is a solid-web beam with its low weight and proven end reinforcement in the form of bevelled beam ends. (EN 13377-compliant).

Art.nr. 162

Plywood sheet made of Nordic birch with 120 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Art.nr. 229

Attaching a toeboard to the Handrail post XP 1.20m.

Art.nr. 279

Aid for securing and back-staying floor formwork.

Art.nr. 351

The Doka Floor prop Eurex 20 basic impresses with a weight advantage of up to 4 kg compared to conventional floor props of class B/D according to EN 1065, and at a constant minimum load capacity of 20 kN for any extension length. The special thread geometry also allows the adjusting nut to be released smoothly even under high load.

Art.nr. 682