Steel tube with wall thickness of 3.2 mm.

Арт. 042

Арт. 582560000

For connecting two Scaffold tubes 48.3mm at any angle.

Арт. 682004000

For connecting two Scaffold tubes 48.3mm at an angle of 90°.

Арт. 068968

Арт. 315082075

Stair stringers are the diagonal side members of the 10-leg stair system. The stringers must be used in pairs to support the stair treads. The stringers are used for a typical 2.0m lift height.

Арт. 315072075

Stair stringers are the diagonal side members of the 10-leg stair system. The stringers must be used in pairs to support the stair treads. The stringers are used for a typical 2.0m lift height.

Арт. 315020890

Stair treads are the horizontal members interconnecting to the two stringers of a stairway, forming the treads of the stair system. They are designed for a 1.036m (1.04m) bay width.

Арт. 310067005

Access barriers are designed for use as guardrails at the top and bottom of the Aluminum 4-leg platform stairs and can also be used as barriers round ladder-access hatches in platforms.

Арт. 306030780

Swivel base jacks are used as a starting base for a scaffold. Height and inclination are adjustable to compensate for surface irregularities and level the first lift of the scaffold.

Арт. 306010600

Base jacks are used for adjusting the height of the scaffold. Base jacks 60cm height have a 40 – 450 mm range of adjustment.

Арт. 399020000

Scaffold storage racks are for storing large items such as standards, ledgers, steel planks, etc.

Арт. 301270000

Starter base collars, each with a single rosette placed on the base jack, form a ready-to-use base for the rest of the scaffold. The base collar facilitates alignment of a modular structure.

Арт. 301280000

Leg locks, used in pairs, attach to the bottom rosette of the top standard and to the top rosette of the bottom standard. They lock the standards together in preparation for suspended or lifted scaffold applications.

Арт. 301300005

Rosette clamps T-bolt enable an additional rosette to be added at any point along the vertical standard. A clamp can accommodate up to six connection points.

Арт. 301300015

Rosette clamps T-bolt horizontal enable ledgers to be connected at any point along the length of a bay. For construction of an intermediate transom.

Арт. 304032005

Beam clamps forged rigid are designed to connect the scaffold tube to the flanges of the structural steel beams. They can also be used to secure a suspended scaffold to structural steel beams.

Арт. 305032005

Spigot adapter clamp-bolts are used for constructing handrails shorter than the bay length. Set standard 1.00m on the spigot clamp.

Арт. 310012005

Adjustable swing gates secure access gateways. They close gateways from 0.88m to 1.35m. As safety components, the gates have a yellow finish.

Арт. 399010000

Scaffold cage inserts fit into storage racks, making cages for storage of small items such as clamps and accessories.

Арт. 335040000

Spigots for hanging scaffolds are necessary for connecting standards without spigots in suspended scaffolds (2 bolt axes per connection).