Steel tube with wall thickness of 3.2 mm.

Réf. 042

Réf. 582560000

For connecting two Scaffold tubes 48.3mm at any angle.

Réf. 682004000

For connecting two Scaffold tubes 48.3mm at an angle of 90°.

Réf. 068968

Réf. 318073075

Ladder hatch decks are used to make access hatches in working platforms. They are laid directly on the ledgers and secured with the integral lift-out guard. The integrated ladder enables access to the next level. The ladder needs a support at the bottom (decks). Available in lengths of 2.07m, 2.57m and 3.07m.

Réf. 318072575

Ladder hatch decks are used to make access hatches in working platforms. They are laid directly on the ledgers and secured with the integral lift-out guard. The integrated ladder enables access to the next level. The ladder needs a support at the bottom (decks). Available in lengths of 2.07m, 2.57m and 3.07m.

Réf. 318072075

Ladder hatch decks are used to make access hatches in working platforms. They are laid directly on the ledgers and secured with the integral lift-out guard. The integrated ladder enables access to the next level. The ladder needs a support at the bottom (decks). Available in lengths of 2.07m, 2.57m and 3.07m.

Réf. 315082075

Stair stringers are the diagonal side members of the 10-leg stair system. The stringers must be used in pairs to support the stair treads. The stringers are used for a typical 2.0m lift height.

Réf. 315072075

Stair stringers are the diagonal side members of the 10-leg stair system. The stringers must be used in pairs to support the stair treads. The stringers are used for a typical 2.0m lift height.

Réf. 315020890

Stair treads are the horizontal members interconnecting to the two stringers of a stairway, forming the treads of the stair system. They are designed for a 1.036m (1.04m) bay width.

Réf. 310067005

Access barriers are designed for use as guardrails at the top and bottom of the Aluminum 4-leg platform stairs and can also be used as barriers round ladder-access hatches in platforms.

Réf. 306030780

Le vérin de base pivotant est utilisé comme base de départ pour un échafaudage. Il est réglable en hauteur et en angle pour compenser les irrégularités de façon à avoir toujours un échafaudage plan.

Réf. 306010600

Le vérin de pied est utilisé pour régler la hauteur de l'échafaudage. Avec un vérin de base 60cm, le réglage en hauteur est de 40 - 450 mm.

Réf. 301793000

Standards hanging no spigot are used as verticals to transmit loads to the ground. The absence of spigots means they can be used for shoring applications. Standards are available in increment lengths. Rosettes are welded on every 50cm for interconnecting elements. One spigot can be used to join 2 standards. These standards are suitable for suspended scaffolds

Réf. 301792000

Standards hanging no spigot are used as verticals to transmit loads to the ground. The absence of spigots means they can be used for shoring applications. Standards are available in increment lengths. Rosettes are welded on every 50cm for interconnecting elements. One spigot can be used to join 2 standards. These standards are suitable for suspended scaffolds

Réf. 301791500

Standards hanging no spigot are used as verticals to transmit loads to the ground. The absence of spigots means they can be used for shoring applications. Standards are available in increment lengths. Rosettes are welded on every 50cm for interconnecting elements. One spigot can be used to join 2 standards. These standards are suitable for suspended scaffolds

Réf. 301791000

Standards hanging no spigot are used as verticals to transmit loads to the ground. The absence of spigots means they can be used for shoring applications. Standards are available in increment lengths. Rosettes are welded on every 50cm for interconnecting elements. One spigot can be used to join 2 standards. These standards are suitable for suspended scaffolds

Réf. 301790500

Des montants 0,50m sans manchons HS sont utilisés en tant que « verticales » pour transférer des charges au sol. Le fait qu'ils n'aient pas de manchons permet de les utiliser pour des applications d'étaiement. Les montants sont disponibles en différentes longueurs. Des disques perforés sont soudés tous les 50 cm. Ils permettent de relier différents panneaux. Pour connecter 2 montants, il faut utiliser un manchon. Ces montants doivent être utilisés pour les échafaudages suspendus.

Réf. 301166145

Lattice girders are used to bear heavy loads across large spans or to construct a bridging structure within the scaffold. Lattice girders are available in lengths of 5.14m, 6.14m and 7.71m. They are 50cm in depth and have terminal wedges to lock to the rosettes of the standards. They come without spigots, but separate spigots can be used.

Quantité par paquet : 20 pcs.

Réf. 301165145

Les poutres en treillis sont employées pour supporter des charges lourdes avec de grandes portées et pour créer une construction de pontage à l'intérieur de l'échafaudage. Les poutres en treillis sont disponibles en longueurs de 5,14 m, 6,14 m et 7,71 m. Elles ont une profondeur de 50 cm et sont dotées de cales d'extrémité pour les connecter aux disques perforés des tubes d'étais. Elles sont livrées sans connexion de tube mais une connexion de tube séparée peut être utilisée.

Quantité par paquet : 20 pcs.