Steel tube with wall thickness of 3.2 mm.

Cod. art. 042

Cod. art. 581420000

Connector in use with anchor plates and tie rods.

Cod. art. 581951000

Lost form-tie distance tube for retrievable form ties.

Cod. art. 581463000

Lost form-tie distance tube for retrievable form ties.

Cod. art. 581953000

Closing plastic tubes left in the concrete.

Dimensione confezione: 1.000 pz.

Cod. art. 588180000

For sealing off the unneeded anchoring sleeves in the frame profile.

Dimensione confezione: 100 pz.

For load transfer, keeps the Doka formwork beams in position and gives the formwork panel stability and rigidity.

Cod. art. 095

Transfers heavy loads, keeps the Doka formwork beams in position and gives the formwork panel stability and rigidity.

Cod. art. 096

Cod. art. 580031000

For making standard corner panels with Doka beams H20 and Doka formwork sheets.

Spindle strut for building custom structures, for example for superstructure formwork and tunnel formwork.

Cod. art. 103

Cod. art. 588631000

Attachment for plumbing accessories.

Cod. art. 588633000

Lost spreader element for the re-usability of the Doka Express anchor.

Dimensione confezione: 100 pz.

Cod. art. 580082000

Formwork-sheet stop for panel assembly of the timber-beam formwork.

Cod. art. 580120000

For securing Doka beams anywhere on the waling or steel profile, for example the I-beam.

Cod. art. 580137000

For securing Doka beams or squared timbers anywhere on the waling or steel profile, for example the IPB. Also suitable for post-assembly securing.

Cod. art. 580196000

Plastic edger for covering stripping-out joins.

Cod. art. 580262000

Inside corner plate, for example for shaft formwork. Enables the entire shaft inside corner to be struck and repositioned in one piece.

Cod. art. 580267000

For making rigid corner plates at any angle. After the formwork has been plumbed, two Half splice plates are welded at the predefined angle.

Cod. art. 580381000

Nailed connection for intersecting Doka beams or squared timbers.

Cod. art. 580390000

Toolbox with selected, typical hand tools needed especially for working on timber-beam formwork.