Item no. 580441000

Bracket for making a folding platform.

Item no. 580424000

Pre-assembled scaffold platform for use as working or protection platform at an outside corner.

Item no. 580413000

Pre-assembled scaffold platform for use as working or protection platform at an inside corner.

Item no. 580485000

Closure between 2 folding platforms and corner solution.

Steel tube with wall thickness of 3.2 mm.

Item no. 042

Item no. 582560000

For connecting two Scaffold tubes 48.3mm at any angle.

Item no. 580447000

Extension of the handrail posts of the Folding platform K for installation of scaffold tubes and safety nets.

Item no. 586456000

Making safety barriers on the structure or on the formwork.

Item no. 580470000

Erecting safety railings at exposed outer edges.

Item no. 584384000

Fall protection on the structure.

Item no. 584385000

Pushed into the fresh concrete, push-in socket for the Handrail post 1.10m.

Item no. 580488000

End-guard for platforms of between 1.20 m and 1.80 m wide.

Item no. 580425000

Securing a panel strut to the Folding platform K.

Item no. 580589000

Item no. 580585000

Item no. 580583000

Item no. 580579000

Releasing the positioning cones.

Item no. 581120000

Lost form-tie component for single-sided formwork tying.

A package consists of 70 pieces.

Item no. 581448000

Tightening and loosening cone screws.

Item no. 581692000

Securing cantilever positioning cones when it is not possible to drill through the formwork sheeting.