Steel tube with wall thickness of 3.2 mm.

Cod. art. 042

Cod. art. 582560000

For connecting two Scaffold tubes 48.3mm at any angle.

Cod. art. 586456000

Making safety barriers on the structure or on the formwork.

Cod. art. 584384000

Fall protection on the structure.

Cod. art. 584385000

Pushed into the fresh concrete, push-in socket for the Handrail post 1.10m.

Dimensione confezione: 100 pz.

Cod. art. 584386000

Pushed into the fresh concrete, screw-in socket for the Handrail post 1.10m.

Dimensione confezione: 100 pz.

Cod. art. 588620000

Lifting accessory with load balancing for lifting formwork, platforms and multi-trip packaging items.

Cod. art. 580589000

Cod. art. 580579000

Releasing the positioning cones.

Cod. art. 581120000

Lost form-tie component for single-sided formwork tying.

Cod. art. 581448000

Tightening and loosening cone screws.

Cod. art. 581692000

Securing cantilever positioning cones when it is not possible to drill through the formwork sheeting.

Cod. art. 581890000

Expendable form-tie component for single-sided tying.

Dimensione confezione: 25 pz.

Cod. art. 581891000

Closing the opening left in the concrete by the bridge edge beam support.

Dimensione confezione: 100 pz.

Cod. art. 581896000

Expendable form-tie component for single-sided tying.

Dimensione confezione: 25 pz.

Cod. art. 581966000

Connector with captive support plate used with tie rods.

Cod. art. 581984000

Expendable form-tie component for single-sided tying.

Cod. art. 580428000

Making post-casting suspension points for Folding platforms A and K with rock anchor spreader unit.

Cod. art. 580495000

Suspending Folding platforms A, B and K with insulation up to 11 cm thick.

Cod. art. 580496000

Suspending Folding platforms A, B and K with insulation up to 11 cm thick.