Št. art. 580441000

Bracket for making a folding platform.

Št. art. 580424000

Pre-assembled scaffold platform for use as working or protection platform at an outside corner.

Št. art. 580413000

Pre-assembled scaffold platform for use as working or protection platform at an inside corner.

Št. art. 580485000

Closure between 2 folding platforms and corner solution.

Steel tube with wall thickness of 3.2 mm.

Št. art. 042

Št. art. 582560000

For connecting two Scaffold tubes 48.3mm at any angle.

Št. art. 580447000

Extension of the handrail posts of the Folding platform K for installation of scaffold tubes and safety nets.

Št. art. 586456000

Making safety barriers on the structure or on the formwork.

Št. art. 580470000

Erecting safety railings at exposed outer edges.

Št. art. 584384000

Fall protection on the structure.

Št. art. 584385000

Pushed into the fresh concrete, push-in socket for the Handrail post 1.10m.

Pakiranje vsebuje 100 kosov.

Št. art. 580488000

End-guard for platforms of between 1.20 m and 1.80 m wide.

Št. art. 580425000

Securing a panel strut to the Folding platform K.

Št. art. 580589000

Št. art. 580585000

Št. art. 580583000

Št. art. 580579000

Releasing the positioning cones.

Št. art. 581120000

Lost form-tie component for single-sided formwork tying.

Št. art. 581448000

Tightening and loosening cone screws.

Št. art. 581692000

Securing cantilever positioning cones when it is not possible to drill through the formwork sheeting.