Andamio de trabajo | Doka España

Scaffold tube 48.3mm

Steel tube with wall thickness of 3.2 mm.

Varianter:

Lešeňová trubka 48,3mm 1,00m
Lešeňová trubka 48,3mm 1,50m
Ställningsrör 48,3mm 2,00m
Ställningsrör 48,3mm 2,50m
Ställningsrör 48,3mm 3,00m
Ställningsrör 48,3mm 3,50m
Ställningsrör 48,3mm 4,00m
Ställningsrör 48,3mm 4,50m
Ställningsrör 48,3mm 5,00m
Lešeňová trubka 48,3mm 5,50m
Lešeňová trubka 48,3mm 6,00m

Ny

Begagnat

Uthyrning/månad

Swivel coupler 48mm

Artikel nr. 582560000

For connecting two Scaffold tubes 48.3mm at any angle.

Ny

Begagnat

Uthyrning/månad

Normal coupler 48mm

Artikel nr. 682004000

For connecting two Scaffold tubes 48.3mm at an angle of 90°.

Ny

Begagnat

Uthyrning/månad

Staxo 40 tube connector D48.3mm

Artikel nr. 582204000

Securing the Staxo 40 coupler.

Ny

Begagnat

Uthyrning/månad

Wall tie tube 1.50m

Artikel nr. 338191500

The Wall tie is designed to attach to a Scaffold tube and butt to a supporting structure. It is available in 1.00m and 1.50m.

Wall tie tube 1.00m

Artikel nr. 338191000

The Wall tie is designed to attach to a Scaffold tube and butt to a supporting structure. It is available in 1.00m and 1.50m.

Screw jack U-head 60cm

Artikel nr. 328460600

The U head is designed to be installed at the top of a scaffold. Particularly for Shoring applications where beams are required to be supported. Alternatively the U head can be used at the base of the scaffold by turning it upside down.

4-way screw jack head 60cm

Artikel nr. 328450600

The 4 way screw jack is designed to be installed at the top of a scaffold. Particularly for shoring applications where one more beams are required to be supported.

Alum. ladder hatch deck 257cm

Artikel nr. 319022575

The Alum ladder hatch deck 257cm acts as a lightweight, extra wide scaffold acess deck which incorporates a Ladder. It is available only with 2.57m.

Alum. stair inner ext. guardr. 200/307cm

Artikel nr. 316053075

The inner guardrail extended is used to shield the inner side of a staircase tower at the exit providing a guardrail at landing bay. Available for stair lengths of 2.57m and 3.07m.

Alum. stair inner ext. guardr. 200/257cm

Artikel nr. 316052575

The inner guardrail extended is used to shield the inner side of a staircase tower at the exit providing a guardrail at landing bay. Available for stair lengths of 2.57m and 3.07m.

Alum. stair platform 200/307cm

Artikel nr. 316013075

The stairs are used to provide access to the various deck levels within the scaffold. The aluminum platform stairs are suitable for 2.00 kN/m² (EN12811: class 3). Alu-stairways are available in lengths of 2.57m, 3.07m.

Alum. stair platform 200/257cm

Artikel nr. 316012575

The stairs are used to provide access to the various deck levels within the scaffold. The aluminum platform stairs are suitable for 2.00 kN/m² (EN12811: class 3). Alu-stairways are available in lengths of 2.57m, 3.07m.

Swivel base jack 78cm

Artikel nr. 306030780

The Swivel base jack is used as a starting base for a scaffold. It is adjustable in height and angle to allow for compensation on uneven surfaces so that a level scaffold is always attainable.

Base jack 60cm

Artikel nr. 306010600

The base jack is used to adjust the height of the scaffold. For base jack 60cm height adjustability is 40 – 450 mm.

Standard 3.00m hanging no spigot

Artikel nr. 301793000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Standard 2.00m hanging no spigot

Artikel nr. 301792000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Standard 1.50m hanging no spigot

Artikel nr. 301791500

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Standard 1.00m hanging no spigot

Artikel nr. 301791000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Standard 0.50m hanging no spigot

Artikel nr. 301790500

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Andamio de trabajo | Doka España

Filter

Scaffolding

Andamio de trabajo | Doka España

Filter

Scaffolding

Samtycke cookies och dataöverföring till USA

1) om användning av cookies

2) för överföring av data insamlade via cookies till USA

Är du i införstådd med användningen av cookies och överföringen av dina personuppgifter till USA?

Samtycke cookies och dataöverföring till USA