Dimensionally stable solid-web beam with three-ply web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.-No. 002

Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.-No. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Art.-No. 004

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Art.-No. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 008

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Art.-No. 019

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Art.-No. 022

EN 1065-compliant telescopic construction prop, made of steel.

Art.-No. 024

EN 1065-compliant telescopic construction prop, made of steel.

Art.-No. 025

Doka-Deckenstützen Eurex eco sind wirtschaftliche Baustützen aus Stahl mit Ausziehvorrichtung, entsprechend EN 1065. Sie dienen als vertikale Stützen für temporäre Konstruktionen und zeichnen sich durch die konstant hohe Tragkraft von 20 kN bei jeder Auszuglänge aus.

Art.-No. 026

Floor prop for heavy slab loads.

Art.-No. 028

Self-cleaning threadbar

Art.-No. 029

Self-cleaning threadbar

Art.-No. 030

Self-cleaning threadbar

Art.-No. 032

Self-cleaning threadbar

Art.-No. 033

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Art.-No. 035

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Art.-No. 036

Forming right-angled outside corners, stop-ends and column formwork.

Art.-No. 037

Forming right-angled inside corners.

Art.-No. 038