Der widerstandsfähige Schalungsträger in Vollwandkonstruktion

Hochwertig, robust, langlebig – Der Doka-Träger H20 top P ist ein widerstandsfähiger Vollwandträger mit einem Steg aus Spezial-Flachpressplatte, der in Wand- und Deckenschalungssystemen eingesetzt werden kann. Die innovative Endverstärkung aus Polyurethan reduziert Beschädigungen und garantiert eine bis zu dreifach längere Lebensdauer.

Art.-No. 003

The tried-and-tested formwork beam in solid-web design

High-quality, hard-wearing, durable – The Doka beam H20 eco N is a dimensionally stable solid wall beam with a three-ply sheet web and proven end-reinforcement by bevelling the beam ends and an extra plastic rivet in the beam chord. The beam can be used in wall and slab formwork systems.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 004

The tried-and-tested formwork beam in solid-web design

High-quality, hard-wearing, durable – The Doka beam H20 eco P is a dimensionally stable solid wall beam with a web made of special flat-pressed sheet and proven end-reinforcement by bevelling the beam ends and an extra plastic rivet in the beam chord. The beam can be used in wall and slab formwork systems.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 005

The high-performance quality sheet for special requirements and many uses

The Doka formwork sheet 3-SO is a high-grade three-ply solid-wood sheet with urea-melamine resin coating on both sides for horizontal and vertical formwork applications. It offers first-class concrete results due to selected wood quality and excellent surface finishing.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 006

The inexpensive three-layer sheet for all standard applications

The Formwork sheet 3S basic is a three-ply solid-wood sheet with urea-melamine resin coating on both sides for many different uses on construction sites, which is suitable for repeated use. Less reworking costs are incurred due to high dimensional and angular accuracy.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 008

The large-format exposed concrete sheet made of Nordic birch for high exposed concrete requirements and application figures

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The edges are sealed with high-grade 2-component edge protection varnish.

Art.-No. 019

The robust birch plywood sheet for smooth exposed concrete surfaces

DokaPly Birch DC 21mm is a birchwood-veneer plywood sheet with 220 g/m² film coating on both sides, for horizontal and vertical formwork applications subject to ultra-high requirements for the concrete surfaces.

Art.-No. 022

The extra long-lived floor prop with impact protector

The robust and long-lived Eurex 20 top floor prop impresses with a high minimum load capacity of 20 kN and complies with prop classes D, B/D or C/D in accordance with standard EN 1065. The integrated impact protector reliably protects the outer tube from mechanical damage and significantly increases the life span of the tubular steel prop.

Art.-No. 024

The extra long-lived floor prop with impact protector

The robust and long-lived Eurex 30 top floor prop impresses with a high minimum load capacity of 30 kN and complies with prop classes C/E in accordance with standard EN 1065. The integrated impact protector reliably protects the outer tube from mechanical damage and significantly increases the life span of the tubular steel prop.

Art.-No. 025

The lightweight aluminium floor prop with high load capacity

The floor prop Eurex 100 plus is a high-strength construction prop made of aluminium with a load capacity up to 128 kN, type-tested and approved in accordance to with approval Z-8.312-868. The floor prop also impresses with its easy handling thanks to quick-motion adjustment screw jack.

Art.-No. 028

Selbstreinigender Gewinderippenstab.

Art.-No. 029

Selbstreinigender Gewinderippenstab.

Art.-No. 030

Selbstreinigender Gewinderippenstab.

Art.-No. 032

Selbstreinigender Gewinderippenstab.

Art.-No. 033

Rahmenelement mit Xlife-Platte und innenliegenden Ankerstellen für großflächiges Schalen mit dem Kran. Das Element wird mit einem einseitig bedienbaren Ankersystem geankert.

Art.-No. 035

Rahmenelement mit Xlife-Platte für großflächiges Schalen mit dem Kran.

Art.-No. 036

Schalen von rechtwinkeligen Außenecken, Stirnabschalungen und Stützenschalungen.

Art.-No. 037

Schalen von rechtwinkeligen Innenecken.

Art.-No. 038

Schalen von rechtwinkeligen Innenecken.

Art.-No. 039

Schalen von rechtwinkeligen Außenecken.

Art.-No. 040