Artikel nr. 580441000

Bracket for making a folding platform.

Artikel nr. 580485000

Closure between 2 folding platforms and corner solution.

Artikel nr. 582560000

For connecting two Scaffold tubes 48.3mm at any angle.

Artikel nr. 586456000

Making safety barriers on the structure or on the formwork.

Artikel nr. 580470000

Erecting safety railings at exposed outer edges.

Artikel nr. 584384000

Fall protection on the structure.

Artikel nr. 584386000

Pushed into the fresh concrete, screw-in socket for the Handrail post 1.10m.

Artikel nr. 580488000

End-guard for platforms of between 1.20 m and 1.80 m wide.

Artikel nr. 588620000

Lifting accessory with load balancing for lifting formwork, platforms and multi-trip packaging items.

Artikel nr. 580425000

Securing a panel strut to the Folding platform K.

Artikel nr. 580579000

Releasing the positioning cones.

Artikel nr. 581120000

Lost form-tie component for single-sided formwork tying.

Artikel nr. 581692000

Securing cantilever positioning cones when it is not possible to drill through the formwork sheeting.

Artikel nr. 581890000

Expendable form-tie component for single-sided tying.

Förpackningsstorlek: 25 st.

Artikel nr. 581891000

Closing the opening left in the concrete by the bridge edge beam support.

Artikel nr. 581896000

Expendable form-tie component for single-sided tying.

Förpackningsstorlek: 25 st.

Artikel nr. 581966000

Connector with captive support plate used with tie rods.

Artikel nr. 581984000

Expendable form-tie component for single-sided tying.

Artikel nr. 580428000

Making post-casting suspension points for Folding platforms A and K with rock anchor spreader unit.

Artikel nr. 580497000

Securing suspension cones for insulation up to 11 cm thick if it is not possible to drill through the formwork sheeting.