Réf. 306010600

The base jack is used to adjust the height of the scaffold. For base jack 60cm height adjustability is 40 – 450 mm.

Réf. 301013000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Réf. 301012000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Réf. 301011000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Réf. 301010500

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Réf. 301270000

The base collar with a single rosette is placed on the base jack and forms an easy base for the rest of the scaffold. The base collar makes the alignment of a modular structure easier.

Truss ledgers have the same function as the normal ledgers: They are used as horizontals to connect standards, to transfer loads from platforms into standards and for making side protection of the scaffold. But due to reinforced design, they are able to transfer higher loads than normal ledgers. Double ledgers are available in lengths 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Réf. 527

The bracket is used to create an extended platform outside the scaffold and to add a "cantilever" to the construction. Brackets are available in lengths 0.39m, 0.73m and 1.09m.

Réf. 543

Ledgers are used as horizontals to connect standards and to transfer loads from platforms into standards. Ledgers are also used for making side protection of the scaffold. Ledgers are available in lengths 0.15m, 0.39m, 0.73m, 1.04m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Réf. 549

Les planchons acier sont employés pour créer une plate-forme de travail dans un échafaudage. Ils sont placés directement sur les moises et sécurisés avec la sécurité anti-soulèvement intégrée. Les planchons acier sont disponibles en deux largeurs 0,19 m et 0,32 m et dans les longueurs 0,73 m, 1,09 m, 1,40 m, 1,57 m, 2,07 m, 2,57 m et 3,07 m.

Réf. 559

Steel toe boards are mounted on working platforms to prevent material from falling down. These Toeboards are galvanized and not yellow.

Réf. 561

Les entretoises sont indispensables pour augmenter la rigidité verticale de l’échafaudage ! Des étançons verticaux sont utilisés pour stabiliser le plan extérieur de l'échafaudage, parallèlement et verticalement à la façade. Les étançons verticaux doivent être placés verticalement à la façade au moins dans chaque 5ème travée d'un échafaudage et dans chaque travée d'extrémité. Les diagonales sont disponibles pour des hauteurs de 1,00 m, 1,50 m et 2,0 m ainsi que pour des longueurs de travée de 0,73 m, 1,09 m, 1,40 m, 1,57 m, 2,07 m, 2,57 m et 3,07 m.

Réf. 574