Art.-No. 589223000

For watertight and fire-resistant closure of the form-tie points in the concrete.

Package size: 100 pcs.

Art.-No. 588651000

Telescopic tool for operating the Framax lifting hook from ground level.

Art.-No. 589288000

For sealing the form-tie points in the concrete.

Package size: 500 pcs.

Art.-No. 759040305

Art.-No. 759040306

Art.-No. 589280500

Closing unused form-tie sleeves in the Framax Xlife plus panel.

Package size: 500 pcs.

Telescopic steel prop.

Art.-No. 161

Bearing plate for connectors.

Art.-No. 201

Attaching a toeboard to the Handrail post XP 1.20m.

Art.-No. 279

Art.-No. 306010600

Die Gewindefussplatte wird zur Höhenverstellung des Gerüstes verwendet. Bei der Gewindefussplatte 60cm beträgt die Höhenverstellbarkeit 40 - 450 mm.

Art.-No. 301270000

The base collar with a single rosette is placed on the base jack and forms an easy base for the rest of the scaffold. The base collar makes the alignment of a modular structure easier.

Das Trennmittel speziell für glatte Schalhaut

Art.-No. 496

Release agent specially for absorbent formwork surfaces.

Art.-No. 521

Truss ledgers have the same function as the normal ledgers: They are used as horizontals to connect standards, to transfer loads from platforms into standards and for making side protection of the scaffold. But due to reinforced design, they are able to transfer higher loads than normal ledgers. Double ledgers are available in lengths 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 527

The bracket is used to create an extended platform outside the scaffold and to add a "cantilever" to the construction. Brackets are available in lengths 0.39m, 0.73m and 1.09m.

Art.-No. 543

Ledgers are used as horizontals to connect standards and to transfer loads from platforms into standards. Ledgers are also used for making side protection of the scaffold. Ledgers are available in lengths 0.15m, 0.39m, 0.73m, 1.04m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 549

Steel planksare used to create a working platform in a scaffold. They are placed directly onto the ledgers and secured with the integrated lift-out guard. Steel planks are available with two widths 0.19m and 0.32m and in lengths 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 559

Steel toe boards are mounted on working platforms to prevent material from falling down. These Toeboards are galvanized and not yellow.

Art.-No. 561

Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 574

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Art.-No. 844