Dimensionally stable solid-web beam with three-ply web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.-nr. 002

Timber formwork beam H20 eco P is a sold-web beam in accordance with EN 13377 with proven end reinforcement in the form of bevelled beam ends and extra plastic rivet in the beam flange.

Art.-nr. 005

Le panneau de qualité performant pour des exigences particulières et de nombreuses usages

Le panneau Doka 3-SO 21mm est un panneau en bois massif de haute qualité à trois couches avec un revêtement en résine mélamine urée sur les deux faces pour des utilisations de coffrage horizontales et verticales. Elle offre des résultats de premier ordre en matière de béton grâce à une qualité de bois sélectionnée et à une excellente finition de surface.

Veuillez noter qu'en raison d'une demande accrue, des goulots d'étranglement peuvent se produire et que les délais de livraison peuvent s'en trouver prolongés.

Art.-nr. 006

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Art.-nr. 022

The Doka Floor prop Eurex 30 top has an integrated impact protector (except for length 550) for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 30 kN at any extension length and corresponds to prop class C/E according to EN 1065.

Art.-nr. 025

Self-cleaning threadbar

Art.-nr. 029

Self-cleaning threadbar

Art.-nr. 030

Grating for safety barriers on the formwork or on the structure.

Art.-nr. 043

Bracing gangforms, infills and corners and forming stop-ends.

Art.-nr. 075

Bracing load-bearing tower frames.

Art.-nr. 076

Post for safety barriers on the formwork or on the structure.

Art.-nr. 089

Basic frame with integral ladder and captive connectors for vertical stacking.

Art.-nr. 105

Art.-nr. 581961000

Connector in use with anchor plates and tie rods.

Art.-nr. 581964000

Connector in use with anchor plates and tie rods.

Art.-nr. 581966000

Connector with captive support plate used with tie rods.

Art.-nr. 586148000

Supporting side formwork of drop beams and slab stop-ends.

Art.-nr. 586149000

In combination with Beam forming support 20, adapting to the height of drop beams and slab stop-ends.

Art.-nr. 586170000

Floor-prop head for supporting and stabilising Doka formwork beams.

Art.-nr. 586174000

Floor-prop head for supporting and stabilising Doka formwork beams, with integral quick-lowering feature.

Art.-nr. 586179000

Securing intermediate props to prevent toppling.

Packungsgröße: 40 Stk.