Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

Réf. 003

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Réf. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Frais d'expédition : pour les commandes d'un chargement complet de camion, la livraison est gratuite départ usine.

Réf. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Nota sulle spese di spedizione: in caso di ordini che comportano un carico completo di camion, la consegna è gratuita franco fabbrica.

Réf. 008

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Numero di livelli: 15

Réf. 022

The Doka Floor prop Eurex 20 top has an integrated impact protector for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 20 kN at any extension length and corresponds to prop class D, B/D or C/D according to EN 1065.

Réf. 024

Self-cleaning threadbar

Réf. 029

Self-cleaning threadbar

Réf. 030

Expendable form-tie distance tube for retrievable form ties at waterproof form-tie points.

Réf. 031

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Réf. 035

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Réf. 036

Forming right-angled outside corners, stop-ends and column formwork.

Réf. 037

Forming right-angled inside corners.

Réf. 038

Forming right-angled outside corners.

Réf. 040

Bracing gangforms, infills and corners and forming stop-ends.

Réf. 041

Steel tube with wall thickness of 3.2 mm.

Réf. 042

Grating for safety barriers on the formwork or on the structure.

Réf. 043

Tapered form tie, operated from one side only, for Framed formwork Framax Xlife plus.

Réf. 046

Forming acute-angle and obtuse-angle inside corners.

Réf. 048

Forming acute-angle and obtuse-angle outside corners.

Réf. 049