Tubo di acciaio con parete di 3,2 mm di spessore.

Art.nr. 042

Art.nr. 582560000

Collegamento di due tubi di ponteggio 48,3mm ad un angolo d’inclinazione qualsiasi.

Art.nr. 582680000

Realizzazione degli ancoraggi della torre scala nell'edificio.

Art.nr. 682004000

Collegamento di due tubi di ponteggio 48,3mm ad un angolo d’inclinazione die 90°.

Art.nr. 338191500

Il tubo di ancoraggio a parete è progettato in modo da poter essere fissato a un tubo da ponteggio e collegato a una struttura portante. È disponibile nelle lunghezze di 1,00 m e 1,50 m.

Art.nr. 338191000

Il tubo di ancoraggio a parete è progettato in modo da poter essere fissato a un tubo da ponteggio e collegato a una struttura portante. È disponibile nelle lunghezze di 1,00 m e 1,50 m.

Art.nr. 328460600

La testa registrabile è progettato per essere installato in sommità ad una torre di carico. Questo vale in particolare per le applicazioni in cui è necessario sostenere le travi. In alternativa, la testa registrabile può essere utilizzata anche alla base del ponteggio, capovolgendola.

Art.nr. 328450600

The 4 way screw jack is designed to be installed at the top of a scaffold. Particularly for shoring applications where one more beams are required to be supported.

Art.nr. 319022575

L'impalcato di accesso in alluminio da 257 cm serve come impalcato di accesso al ponteggio leggero ed extra-largo con scala integrata. È disponibile solo con la misura 2,57 m.

Art.nr. 316053075

The inner guardrail extended is used to shield the inner side of a staircase tower at the exit providing a guardrail at landing bay. Available for stair lengths of 2.57m and 3.07m.

Art.nr. 316052575

The inner guardrail extended is used to shield the inner side of a staircase tower at the exit providing a guardrail at landing bay. Available for stair lengths of 2.57m and 3.07m.

Art.nr. 316013075

The stairs are used to provide access to the various deck levels within the scaffold. The aluminum platform stairs are suitable for 2.00 kN/m² (EN12811: class 3). Alu-stairways are available in lengths of 2.57m, 3.07m.

Art.nr. 315082075

The Stair stringer is the diagonal member of the 10 Leg Stair System. The Stringer must be used in pairs in order of supporting the stair treads. The Stringer is used for a typical 2.0m lift height.

Art.nr. 315072075

The Stair stringer is the diagonal member of the 10 Leg Stair System. The Stringer must be used in pairs in order of supporting the stair treads. The Stringer is used for a typical 2.0m lift height.

Art.nr. 315020890

The Stair tread is designed as the horizontal member connecting to the Stair stringers, providing the steps of the stair system. This fits into a 1.036m (1.04m) Bay width.

Art.nr. 306030780

The Swivel base jack is used as a starting base for a scaffold. It is adjustable in height and angle to allow for compensation on uneven surfaces so that a level scaffold is always attainable.

Art.nr. 306010600

The base jack is used to adjust the height of the scaffold. For base jack 60cm height adjustability is 40 – 450 mm.

Art.nr. 301793000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Art.nr. 301792500

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Art.nr. 301792000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds