Art.-No. 584909000

Mezzo di stoccaggio e di trasporto.

The Doka stacking pallet 2.00 x 1.70 m is used for convenient relocation of the Safeflex sliding mesh with a crane on the construction site.

Piattaforma di lavoro pieghevole premontata con parapetti laterali, botola a chiusura automatica e possibilità di collegamento per scale e puntellazioni di sostegno.

Art.-No. 114

Ancoraggio inclinato per l'ancoraggio della puntellazione variabile.

Art.-No. 200

Rotazione e fissaggio delle barre ancoranti.

Art.-No. 202

The stress-resistant formwork beam in solid-web design

High-quality, robust, long-lasting – The Doka H20 top N beam is a durable formwork beam in solid-web design with with a three-ply sheet web that can be used in wall and slab formwork systems. The innovative polyurethane beam-end caps reduce damage and guarantee a service life that is up to three times longer.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 002

The durable formwork beam with a solid-web design

High-quality, robust, long-lasting – The Doka H20 top P beam is a durable formwork beam in solid-web design with a web made of special flat-pressed sheet that can be used in wall and slab formwork systems. The innovative polyurethane beam-end caps reduce damage and guarantee a service life that is up to three times longer.

Art.-No. 003

The tried-and-tested formwork beam in solid-web design

High-quality, hard-wearing, durable – The Doka beam H20 eco N is a dimensionally stable solid wall beam with a three-ply sheet web and proven end-reinforcement by bevelling the beam ends and an extra plastic rivet in the beam chord. The beam can be used in wall and slab formwork systems.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 004

The tried-and-tested formwork beam in solid-web design

High-quality, hard-wearing, durable – The Doka beam H20 eco P is a dimensionally stable solid wall beam with a web made of special flat-pressed sheet and proven end-reinforcement by bevelling the beam ends and an extra plastic rivet in the beam chord. The beam can be used in wall and slab formwork systems.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 005

The high-performance quality sheet for special requirements and many uses

The Doka formwork sheet 3-SO is a high-grade three-ply solid-wood sheet with urea-melamine resin coating on both sides for horizontal and vertical formwork applications. It offers first-class concrete results due to selected wood quality and excellent surface finishing.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 006

Pannello a tre strati di abete rosso conforme alla ÖNORM B 3023 incollato a croce con/senza bordo per superfici di calcestruzzo di elevata qualità. Rivestimento della superficie con colla a base di resina ureica-melamminica.

Art.-No. 007

The inexpensive three-layer sheet for all standard applications

The Formwork sheet 3S basic is a three-ply solid-wood sheet with urea-melamine resin coating on both sides for many different uses on construction sites, which is suitable for repeated use. Less reworking costs are incurred due to high dimensional and angular accuracy.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 008

Pannello a tre strati di abete rosso conforme alla ÖNORM B 3023 incollato a croce con/senza bordo per superfici di calcestruzzo di elevata qualità. Rivestimento della superficie con colla a base di resina ureica-melamminica.

Art.-No. 009

Legno multistrato di betulla con rivestimento con film in resina fenolica di alta qualità di 120 g/m². L'incollaggio è conforme ai requisiti della norma EN 314-2, classe di utilizzo 3, DIN 68705 BFU 100 o B S 6566 WBP.

Art.-No. 015

Legno multistrato di betulla con rivestimento con film in resina fenolica di alta qualità di 220 g/m². L'incollaggio è conforme ai requisiti della norma EN 314-2, classe di utilizzo 3, DIN 68705 BFU 100 o B S 6566 WBP.

Art.-No. 017

Legno multistrato di betulla con rivestimento con film in resina fenolica di alta qualità di 220 g/m². L'incollaggio è conforme ai requisiti della norma EN 314-2, classe di utilizzo 3, DIN 68705 BFU 100 o B S 6566 WBP.

Art.-No. 018

The large-format exposed concrete sheet made of Nordic birch for high exposed concrete requirements and application figures

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The edges are sealed with high-grade 2-component edge protection varnish.

Art.-No. 019

The robust birch plywood sheet for smooth exposed concrete surfaces

DokaPly Birch DC 21mm is a birchwood-veneer plywood sheet with 220 g/m² film coating on both sides, for horizontal and vertical formwork applications subject to ultra-high requirements for the concrete surfaces.

Art.-No. 022

The extra long-lived floor prop with impact protector

The robust and long-lived Eurex 20 top floor prop impresses with a high minimum load capacity of 20 kN and complies with prop classes D, B/D or C/D in accordance with standard EN 1065. The integrated impact protector reliably protects the outer tube from mechanical damage and significantly increases the life span of the tubular steel prop.

Art.-No. 024

The extra long-lived floor prop with impact protector

The robust and long-lived Eurex 30 top floor prop impresses with a high minimum load capacity of 30 kN and complies with prop classes C/E in accordance with standard EN 1065. The integrated impact protector reliably protects the outer tube from mechanical damage and significantly increases the life span of the tubular steel prop.

Art.-No. 025

The floor prop with high load capacity and safe handling

The tested quality prop Eurex 20 eco from Doka is characterised by a high minimum load capacity of 20 kN and corresponds to prop class B/D in accordance with standard EN 1065. The steel props also impress with their simple and safe handling and their impressive price-performance ratio.

Art.-No. 026