Steel tube with wall thickness of 3.2 mm.

Toote nr 042

Toote nr 582560000

For connecting two Scaffold tubes 48.3mm at any angle.

Toote nr 582680000

Making anchorages to secure the stair tower to the building.

Toote nr 682004000

For connecting two Scaffold tubes 48.3mm at an angle of 90°.

Toote nr 328460600

The U head is designed to be installed at the top of a scaffold. Particularly for Shoring applications where beams are required to be supported. Alternatively the U head can be used at the base of the scaffold by turning it upside down.

Toote nr 328450600

The 4 way screw jack is designed to be installed at the top of a scaffold. Particularly for shoring applications where one more beams are required to be supported.

Toote nr 319022575

The Alum ladder hatch deck 257cm acts as a lightweight, extra wide scaffold acess deck which incorporates a Ladder. It is available only with 2.57m.

Toote nr 316053075

The inner guardrail extended is used to shield the inner side of a staircase tower at the exit providing a guardrail at landing bay. Available for stair lengths of 2.57m and 3.07m.

Toote nr 316052575

Das Innengeländer verlängert wird zur Sicherung der Innenseite eines Treppenturms am Ausgang verwendet und bietet ein Geländer am Ausstiegsbereich. Erhältlich für Treppenlängen von 2,57 m und 3,07 m.

Toote nr 316013075

The stairs are used to provide access to the various deck levels within the scaffold. The aluminum platform stairs are suitable for 2.00 kN/m² (EN12811: class 3). Alu-stairways are available in lengths of 2.57m, 3.07m.

Toote nr 315082075

The Stair stringer is the diagonal member of the 10 Leg Stair System. The Stringer must be used in pairs in order of supporting the stair treads. The Stringer is used for a typical 2.0m lift height.

Toote nr 315072075

The Stair stringer is the diagonal member of the 10 Leg Stair System. The Stringer must be used in pairs in order of supporting the stair treads. The Stringer is used for a typical 2.0m lift height.

Toote nr 315020890

The Stair tread is designed as the horizontal member connecting to the Stair stringers, providing the steps of the stair system. This fits into a 1.036m (1.04m) Bay width.

Toote nr 306030780

Die Gewindefussplatte schwenkbar wird als Startbasis für ein Gerüst verwendet. Sie ist in der Höhe und im Winkel verstellbar, um Unebenheiten auszugleichen, so dass immer ein ebenes Gerüst entsteht.

Toote nr 306010600

Die Gewindefussplatte wird zur Höhenverstellung des Gerüstes verwendet. Bei der Gewindefussplatte 60cm beträgt die Höhenverstellbarkeit 40 - 450 mm.

Toote nr 399020000

The Scaffold storage rack is designed for storage of larger items such as Standards, Ledgers, Steel Plank, etc.

Toote nr 308410735

Der Winkelbelag wird bei runden Gerüsten verwendet, um die Lücke zwischen trapezförmigen Gerüstfeldern zu schließen und so den Bedarf an überlappenden Holzbohlen zu reduzieren. Zwischen den Gerüstfeldern können bis zu 45 Grad eingestellt werden. Er ist in Breiten von 73 cm (2 Stahlbohlen breit) und einer Erweiterung auf 1,09 m (3 Stahlbohlen) breite Gerüste erhältlich.

Toote nr 308411093

The Angular deck is used for circular scaffold applications to close the gap between trapezoidal scaffold bays in order to reduce the need for lapping Wood Planks. Up to 45-degrees of adjustment can be made between bays. It is available at widths of 73cm (2 steel plank wide) and an extension to 1.09m (3 steel plank) wide scaffold.

Toote nr 301270000

The base collar with a single rosette is placed on the base jack and forms an easy base for the rest of the scaffold. The base collar makes the alignment of a modular structure easier.

Toote nr 301280000

The Leg lock, used in pairs, is designed to attach to the bottom rosette of the top Standard and to the top rosette of the bottom Standard. This joins the standards together in preparation for suspended or lifted scaffold applications.