Seals the formwork on the concrete side and prevents the concrete from bleeding.

Art.-No. 213

Storage and transport device for Dokadek panels.

Art.-No. 223

For supporting and aligning wall formwork.

Art.-No. 239

Triangular ledge with soft plastic lips for close fit to the surface of the panel. Used for making no-nails outside corners and column formwork with universal panels.

Art.-No. 260

Triangular ledge with soft plastic lips for close fit to the surface of the panel. Used for making no-nails outside corners and column formwork with universal panels.

Art.-No. 278

Height-adjustable connections between load-bearing tower and superstructure in combination with Split nut B for primary beams (e.g. multi-purpose walings, steel girders).

Art.-No. 297

Connecting Scaffold tubes 48.3mm at any angle to the vertical tubes of load-bearing tower frames.

Art.-No. 341

Art.-No. 589164000

Can be pushed over the end face of the panel (no nails needed). With column formwork and for forming outside corners, it is used with the universal panel (integrated slot grid for universal fixing bolts).

Art.-No. 586646000

Storage and transport device for Protective barriers Z.

The sensor is for taking measurements on horizontal concrete components (bottom slab, floor slab, etc.).

Art.-No. 479

Measuring cable with three measuring points. The cable connects to the Concremote cable sensor and is cast into the concrete as a lost part.

Art.-No. 480

The cable sensor can be deployed for various applications depending on customer requirements. Concremote wall sensing unit or Concremote cable can be connected.

Art.-No. 481

The calibration box cube is for calibrating the type of concrete used and consists of 3 cube moulds 15x15x15 mm.

Art.-No. 482

Release agent specially for smooth formwork surfaces.

Art.-No. 496

The box-out block for more safety on construction sites.

Art.-No. 550

Art.-No. 643

Art.-No. 644

Art.-No. 700

Art.-No. 586624000

Is pre-fitted to the concrete precasting. The DokaRex alignment strut can be engaged from ground level.

Art.-No. 586626000

Securing DokaRex alignment struts to the ground.