Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.-No. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Art.-No. 004

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Art.-No. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 007

Die preiswerte Dreischichtplatte für alle Standardanwendungen

Die Schalungsplatte 3S basic 21mm ist eine Dreischicht- Massivholzplatte mit beidseitiger Harnstoff-Melaminharzbeschichtung für den vielfältigen Baustelleneinsatz, die für mehrmaligen Einsatz geeignet ist. Weniger Kosten für Nacharbeiten entstehen aufgrund hoher Maß- und Winkelgenauigkeit.

Aufgrund erhöhter Nachfrage kann es derzeit zu verlängerten Lieferzeiten kommen.

Art.-No. 008

High-grade plywood sheet made of Nordic birch with 120 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-No. 015

High-grade plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-No. 017

High-grade plywood sheet made of Nordic birch with polypropylene coating on both sides, on the concrete facing side with glass-fibre reinforcing. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 2-component edge protection varnish.

Art.-No. 018

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Art.-No. 019

The Doka Floor prop Eurex 20 top has an integrated impact protector for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 20 kN at any extension length and corresponds to prop class D, B/D or C/D according to EN 1065.

Art.-No. 024

The Doka Floor prop Eurex 30 top has an integrated impact protector (except for length 550) for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 30 kN at any extension length and corresponds to prop class C/E according to EN 1065.

Art.-No. 025

Doka-Deckenstützen Eurex 20 eco sind Baustützen aus Stahl mit Ausziehvorrichtung, entsprechend EN 1065. Sie dienen als vertikale Stützen für temporäre Konstruktionen. Sie sind für den Einsatz in Doka-Deckensystemen konzipiert. 

Art.-No. 026

Floor prop for heavy slab loads.

Art.-No. 028

Self-cleaning threadbar

Art.-No. 029

Expendable form-tie distance tube for retrievable form ties at waterproof form-tie points.

Art.-No. 031

Self-cleaning threadbar

Art.-No. 032

Self-cleaning threadbar

Art.-No. 033

Expendable form-tie distance tube for retrievable form ties in fair-faced concrete.

Art.-No. 034

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Art.-No. 035