Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

English additional description

Art.nr. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Art.nr. 004

The tried-and-tested formwork beam in solid-web design.

High-quality, hard-wearing, durable – The Doka beam H20 eco P is a dimensionally stable solid wall beam with a web made of special flat-pressed sheet and proven end-reinforcement by bevelling the beam ends and an extra plastic rivet in the beam chord. The beam can be used in wall and slab formwork systems.

Art.nr. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.nr. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.nr. 007

The inexpensive three-layer sheet for all standard applications.

The Formwork sheet 3S basic is a three-ply solid-wood sheet with urea-melamine resin coating on both sides for many different uses on construction sites, which is suitable for repeated use. Less reworking costs are incurred due to high dimensional and angular accuracy.

Art.nr. 008

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Anzahl Lagen: 15

Art.nr. 022

The Doka Floor prop Eurex 20 top has an integrated impact protector for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 20 kN at any extension length and corresponds to prop class D, B/D or C/D according to EN 1065.

Art.nr. 024

The Doka Floor prop Eurex 30 top has an integrated impact protector (except for length 550) for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 30 kN at any extension length and corresponds to prop class C/E according to EN 1065.

Art.nr. 025

The Doka floor prop Eurex 20 eco offers consistently high load capacity of at least 20 kN at any extension length and combines this with particularly easy and safe handling. As a steel floor prop of class B/D according to EN 1065, it is versatile and flexible for all common applications.

Art.nr. 026

Self-cleaning threadbar

Art.nr. 029

Self-cleaning threadbar

Art.nr. 030

Steel tube with wall thickness of 3.2 mm.

Art.nr. 042

Grating for safety barriers on the formwork or on the structure.

Art.nr. 043

Bracing gangforms, infills and corners and forming stop-ends.

Art.nr. 075

Bracing load-bearing tower frames.

Art.nr. 076

Infilling along edges and around columns.

Art.nr. 079

For forming large floor areas.

Art.nr. 082

Grille made up of primary and secondary beams with swivel heads, for sheeting with any formwork sheeting.

Art.nr. 083

Post for safety barriers on the formwork or on the structure.

Art.nr. 089