Steel tube with wall thickness of 3.2 mm.

Cod. art. 042

Cod. art. 582560000

For connecting two Scaffold tubes 48.3mm at any angle.

Cod. art. 582680000

Making anchorages to secure the stair tower to the building.

Cod. art. 682004000

For connecting two Scaffold tubes 48.3mm at an angle of 90°.

Cod. art. 328460600

Die Kopfspindel ist für den Einbau an der Oberseite eines Gerüstes vorgesehen. Dies gilt insbesondere für Anwendungen, bei denen Träger abgestützt werden müssen. Alternativ kann die Kopfspindel auch an der Basis des Gerüsts verwendet werden, indem sie umgedreht wird.

Cod. art. 328450600

Die Vierwegkopfspindel ist für den Einbau an der Oberseite eines Gerüstes vorgesehen. Insbesondere für den Einsatz im Traggerüst, wo ein oder mehrere Träger abgestützt werden müssen.

Cod. art. 319022575

Der Alu-Durchstieg 257 cm dient als leichter, extra breiter Gerüstdurchstieg mit integrierter Leiter. Es ist nur mit 2,57m erhältlich.

Cod. art. 316053075

The inner guardrail extended is used to shield the inner side of a staircase tower at the exit providing a guardrail at landing bay. Available for stair lengths of 2.57m and 3.07m.

Cod. art. 316052575

Das Innengeländer verlängert wird zur Sicherung der Innenseite eines Treppenturms am Ausgang verwendet und bietet ein Geländer am Ausstiegsbereich. Erhältlich für Treppenlängen von 2,57 m und 3,07 m.

Cod. art. 316013075

The stairs are used to provide access to the various deck levels within the scaffold. The aluminum platform stairs are suitable for 2.00 kN/m² (EN12811: class 3). Alu-stairways are available in lengths of 2.57m, 3.07m.

Cod. art. 315082075

The Stair stringer is the diagonal member of the 10 Leg Stair System. The Stringer must be used in pairs in order of supporting the stair treads. The Stringer is used for a typical 2.0m lift height.

Cod. art. 315072075

The Stair stringer is the diagonal member of the 10 Leg Stair System. The Stringer must be used in pairs in order of supporting the stair treads. The Stringer is used for a typical 2.0m lift height.

Cod. art. 315020890

The Stair tread is designed as the horizontal member connecting to the Stair stringers, providing the steps of the stair system. This fits into a 1.036m (1.04m) Bay width.

Cod. art. 306030780

The Swivel base jack is used as a starting base for a scaffold. It is adjustable in height and angle to allow for compensation on uneven surfaces so that a level scaffold is always attainable.

Cod. art. 306010600

The base jack is used to adjust the height of the scaffold. For base jack 60cm height adjustability is 40 – 450 mm.

Cod. art. 399020000

The Scaffold storage rack is designed for storage of larger items such as Standards, Ledgers, Steel Plank, etc.

Cod. art. 308410735

The Angular deck is used for circular scaffold applications to close the gap between trapezoidal scaffold bays in order to reduce the need for lapping Wood Planks. Up to 45-degrees of adjustment can be made between bays. It is available at widths of 73cm (2 steel plank wide) and an extension to 1.09m (3 steel plank) wide scaffold.

Cod. art. 308411093

The Angular deck is used for circular scaffold applications to close the gap between trapezoidal scaffold bays in order to reduce the need for lapping Wood Planks. Up to 45-degrees of adjustment can be made between bays. It is available at widths of 73cm (2 steel plank wide) and an extension to 1.09m (3 steel plank) wide scaffold.

Cod. art. 301270000

The base collar with a single rosette is placed on the base jack and forms an easy base for the rest of the scaffold. The base collar makes the alignment of a modular structure easier.

Cod. art. 301280000

The Leg lock, used in pairs, is designed to attach to the bottom rosette of the top Standard and to the top rosette of the bottom Standard. This joins the standards together in preparation for suspended or lifted scaffold applications.