Art.-nr. 582560000

For connecting two Scaffold tubes 48.3mm at any angle.

Art.-nr. 582680000

Making anchorages to secure the stair tower to the building.

Art.-nr. 682004000

For connecting two Scaffold tubes 48.3mm at an angle of 90°.

Art.-nr. 693769001

Formwork sheet protector at the end of the scaffold tube.

Art.-nr. 319022575

The Alum ladder hatch deck 257cm acts as a lightweight, extra wide scaffold acess deck which incorporates a Ladder. It is available only with 2.57m.

Art.-nr. 306010600

The base jack is used to adjust the height of the scaffold. For base jack 60cm height adjustability is 40 – 450 mm.

Art.-nr. 301013000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Art.-nr. 301012000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Art.-nr. 301011000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Art.-nr. 399020000

The Scaffold storage rack is designed for storage of larger items such as Standards, Ledgers, Steel Plank, etc.

Art.-nr. 301270000

The base collar with a single rosette is placed on the base jack and forms an easy base for the rest of the scaffold. The base collar makes the alignment of a modular structure easier.

Art.-nr. 316080005

The inner guardrail is used to shield the inner side of a staircase tower. The inner guardrail suits for both stair lengths of 2.57m, 3.07m.

The outer guardrail is used to shield the outer side of the staircase tower. Outer guardrails are available for stair lengths of 2.57m, 3.07m. The outer guardrail has a Swivel Wedge Terminal that allows to fix it to the rosette.

Art.-nr. 455

Riegel werden als horizontale Verbindungen zwischen Stielen und zur Übertragung von Lasten von Belägen auf Stiele verwendet. Riegel werden auch für den Seitenschutz des Gerüstes verwendet. Riegel sind in den Längen 0,15 m, 0,39 m, 0,73 m, 1,04 m, 1,09 m, 1,40 m, 1,57 m, 2,07 m, 2,57 m und 3,07 m erhältlich.

Art.-nr. 549

Steel planksare used to create a working platform in a scaffold. They are placed directly onto the ledgers and secured with the integrated lift-out guard. Steel planks are available with two widths 0.19m and 0.32m and in lengths 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-nr. 559

Steel toe boards are mounted on working platforms to prevent material from falling down. These Toeboards are galvanized and not yellow.

Art.-nr. 561

Les entretoises sont indispensables pour augmenter la rigidité verticale de l’échafaudage ! Des étançons verticaux sont utilisés pour stabiliser le plan extérieur de l'échafaudage, parallèlement et verticalement à la façade. Les étançons verticaux doivent être placés verticalement à la façade au moins dans chaque 5ème travée d'un échafaudage et dans chaque travée d'extrémité. Les diagonales sont disponibles pour des hauteurs de 1,00 m, 1,50 m et 2,0 m ainsi que pour des longueurs de travée de 0,73 m, 1,09 m, 1,40 m, 1,57 m, 2,07 m, 2,57 m et 3,07 m.

Art.-nr. 574

The stairs are used to provide access to the various deck levels within the scaffold. The aluminum platform stairs are suitable for 2.00 kN/m² (EN12811: class 3). Alu-stairways are available in lengths of 2.57m, 3.07m.

Art.-nr. 718

Steel tube with wall thickness of 3.2 mm.

Art.-nr. 042