Art.-nr. 584909000

Lager- und Transportmittel.

Formstabiler Vollwandträger mit dreischichtigem Steg und einer Endverstärkung aus PUR. (entspricht EN 13377)

Art.-nr. 002

Formstabiler Vollwandträger mit Pressplattensteg und einer Endverstärkung aus PUR. (entspricht EN 13377)

Art.-nr. 003

Timber formwork beam H20 eco N is a solid-web beam in accordance with EN 13377 with proven end reinforcement in the form of bevelled beam ends and extra plastic rivet in the beam flange.

Please note that delivery bottlenecks may occur due to increased demand and delivery times may be extended as a result.

Art.-nr. 004

The tried-and-tested formwork beam in solid-web design

High-quality, hard-wearing, durable – The Doka beam H20 eco P is a dimensionally stable solid wall beam with a web made of special flat-pressed sheet and proven end-reinforcement by bevelling the beam ends and an extra plastic rivet in the beam chord. The beam can be used in wall and slab formwork systems.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-nr. 005

The high-performance quality sheet for special requirements and many uses

The Doka formwork sheet 3-SO is a high-grade three-ply solid-wood sheet with urea-melamine resin coating on both sides for horizontal and vertical formwork applications. It offers first-class concrete results due to selected wood quality and excellent surface finishing.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-nr. 006

Dreischicht-Massivholzplatte aus Fichte mit beidseitig 130 g/m² Harnstoff-Melaminharzbeschichtung. Die Kanten sind mit einer Dispersionsbeschichtung versiegelt. Gemäß ÖNORM B 3023.

Art.-nr. 007

The inexpensive three-layer sheet for all standard applications

The Formwork sheet 3S basic is a three-ply solid-wood sheet with urea-melamine resin coating on both sides for many different uses on construction sites, which is suitable for repeated use. Less reworking costs are incurred due to high dimensional and angular accuracy.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-nr. 008

Dreischicht-Massivholzplatte aus Fichte mit beidseitig 130 g/m² Harnstoff-Melaminharzbeschichtung. Die Kanten sind mit einer Dispersionsbeschichtung versiegelt. Gemäß ÖNORM B 3023.

Art.-nr. 009

Hochwertige Sperrholzplatte aus nordischer Birke mit beidseitig 120 g/m² Phenolharz-Filmbeschichtung. Die Verleimung erfüllt die Anforderungen nach EN 314-2 Nutzungsklasse 3 oder BS 6566 WBP. Die Kanten sind mit einer Dispersionsbeschichtung versiegelt.

Art.-nr. 015

Hochwertige Sperrholzplatte aus nordischer Birke mit beidseitig 220 g/m² Phenolharz-Filmbeschichtung. Die Verleimung erfüllt die Anforderungen nach EN 314-2 Nutzungsklasse 3 oder BS 6566 WBP. Die Kanten sind mit einer Dispersionsbeschichtung versiegelt.

Art.-nr. 017

Hochwertige Sperrholzplatte aus nordischer Birke mit beidseitiger Polypropylenbeschichtung, auf der betonzugewandten Seite glasfaserverstärkt. Die Verleimung erfüllt die Anforderungen nach EN 314-2 Nutzungsklasse 3 oder BS 6566 WBP. Die Kanten sind mit hochwertigem 2-K Kantenschutzlack versiegelt.

Art.-nr. 018

The large-format exposed concrete sheet made of Nordic birch for high exposed concrete requirements and application figures

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3. The edges are sealed with high-grade 2-component edge protection varnish.

Art.-nr. 019

The robust birch plywood sheet for smooth exposed concrete surfaces

DokaPly Birch DC 21mm is a birchwood-veneer plywood sheet with 220 g/m² film coating on both sides, for horizontal and vertical formwork applications subject to ultra-high requirements for the concrete surfaces.

Art.-nr. 022

The extra long-lived floor prop with impact protector

The robust and long-lived Eurex 20 top floor prop impresses with a high minimum load capacity of 20 kN and complies with prop classes D, B/D or C/D in accordance with standard EN 1065. The integrated impact protector reliably protects the outer tube from mechanical damage and significantly increases the life span of the tubular steel prop.

Art.-nr. 024

The extra long-lived floor prop with impact protector

The robust and long-lived Eurex 30 top floor prop impresses with a high minimum load capacity of 30 kN and complies with prop classes C/E in accordance with standard EN 1065. The integrated impact protector reliably protects the outer tube from mechanical damage and significantly increases the life span of the tubular steel prop.

Art.-nr. 025

The floor prop with high load capacity and safe handling

The tested quality prop Eurex 20 eco from Doka is characterised by a high minimum load capacity of 20 kN and corresponds to prop class B/D in accordance with standard EN 1065. The steel props also impress with their simple and safe handling and their impressive price-performance ratio.

Art.-nr. 026

The lightweight aluminium floor prop with high load capacity

The floor prop Eurex 100 plus is a high-strength construction prop made of aluminium with a load capacity up to 128 kN, type-tested and approved in accordance to with approval Z-8.312-868. The floor prop also impresses with its easy handling thanks to quick-motion adjustment screw jack.

Art.-nr. 028

Selbstreinigender Gewinderippenstab.

Art.-nr. 029

Selbstreinigender Gewinderippenstab.

Art.-nr. 030