Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Item no. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Item no. 008

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Item no. 019

Self-cleaning threadbar

Item no. 030

Closure between the panels.

Item no. 044

Closure between the panels for formwork-sheet thickness 21 mm.

Item no. 045

Closure between the panels.

Item no. 062

Item no. 580914000

Pressure sprayer for Doka release agents.

Item no. 581424000

Connector with captive support plate used with tie rods.

Item no. 581450000

Expendable form-tie component for single-sided tying.

Item no. 581890000

Expendable form-tie component for single-sided tying.

Item no. 581896000

Expendable form-tie component for single-sided tying.

Item no. 581966000

Connector with captive support plate used with tie rods.

Item no. 581460000

Lost form-tie distance tube for retrievable form ties.

Item no. 581461000

Prevents concrete from penetrating inside the jacket tube.

Item no. 581865000

Making positioning points at an angle of 45 °.

Item no. 581866000

Making positioning points at an angle of 45 °.

Item no. 581867000

Making positioning points at an angle of 45 °.

Item no. 581897000

Securing the bridge edge beam support to the formwork.

Item no. 581967000

Expendable anchoring cone for making waterproof form-tie points.