Infill planks with 19cm are designed to fill any unwanted gaps between planks or bays providing a continuous working platform. They are available in the sizes of the most common bays: 0.65m, 0,88m, 1.065m, 1.57m, 2.13m, 2.43m, 3.05m.

Item no. 556

Steel planks are used to construct a working platform in a scaffold. They are laid directly on the ledgers and secured with the integral lift-out guard. Steel planks are available in two widths of 0.19m and 0.32m and in lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m and 3.07m.

Item no. 557

Steel planks are used to construct a working platform in a scaffold. They are laid directly on the ledgers and secured with the integral lift-out guard. Steel planks are available in two widths of 0.19m and 0.32m and in lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m and 3.07m.

Item no. 559

Steel toeboards are mounted on working platforms to prevent material from dropping off. These toeboards are galvanized and do not have a yellow finish.

Item no. 561

Steel ladders attach to Ringlock scaffolding with the Ladder hook clamp/clip. The ladder feet are angled away from the rungs for a safe step on and off the ladder. There are 4 ladder lengths: 2.4m, 3.6m, 4.8m and 6.0m.

Item no. 562

Bay braces are essential for increasing the vertical stiffness of the scaffold! Vertical braces are used parallel and perpendicular to the facade for stabilizing the outer plane of the scaffold. Vertical braces are installed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for heights of 1.00m, 1.50m and 2.0m and for bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m and 3.07m.

Item no. 574

Side brackets are used to construct an extended platform outside the scaffold and to add a cantilever to the construction. Side brackets are available in lengths of 0.39m, 0.73m and 1.09m.

Item no. 662