Cod. art. 328460600

Die Kopfspindel ist für den Einbau an der Oberseite eines Gerüstes vorgesehen. Dies gilt insbesondere für Anwendungen, bei denen Träger abgestützt werden müssen. Alternativ kann die Kopfspindel auch an der Basis des Gerüsts verwendet werden, indem sie umgedreht wird.

Cod. art. 328450600

Die Vierwegkopfspindel ist für den Einbau an der Oberseite eines Gerüstes vorgesehen. Insbesondere für den Einsatz im Traggerüst, wo ein oder mehrere Träger abgestützt werden müssen.

Cod. art. 306030780

Die Gewindefussplatte schwenkbar wird als Startbasis für ein Gerüst verwendet. Sie ist in der Höhe und im Winkel verstellbar, um Unebenheiten auszugleichen, so dass immer ein ebenes Gerüst entsteht.

Cod. art. 306010600

Die Gewindefussplatte wird zur Höhenverstellung des Gerüstes verwendet. Bei der Gewindefussplatte 60cm beträgt die Höhenverstellbarkeit 40 - 450 mm.

Cod. art. 301793000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Cod. art. 301792500

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Cod. art. 301792000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Cod. art. 301791500

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Cod. art. 301791000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Cod. art. 301790500

Stiele 0,50m ohne Rohrverbinder HS werden als "Vertikale" verwendet, um Lasten auf den Boden zu übertragen. Die Tatsache, dass sie keine Rohrverbinder haben, ermöglicht es, sie für Shoring Anwendungen zu verwenden. Die Stiele sind in verschiedenen Längen erhältlich. Alle 50 cm sind Rosetten eingeschweißt, die es ermöglichen, eine Verbindung zwischen verschiedenen Elementen herzustellen. Um 2 Stiele zu verbinden, muss ein Rohrverbinder verwendet werden. Diese Stiele sind für Hängegerüste zu verwenden.

Cod. art. 301014000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Una confezione è costituita da 90 pezzo

Cod. art. 301013000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Cod. art. 301012500

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Cod. art. 301012000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Cod. art. 301011500

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Cod. art. 301011000

Stiele 1,00m Rohrverbinder verpresst werden als "Vertikale" verwendet, um Lasten auf den Boden zu übertragen. Alle 50 cm sind Rosetten eingeschweißt, die eine Verbindung zwischen verschiedenen Elementen ermöglichen. Diese Stiele sind nicht für Hängegerüste geeignet! Die Stiele sind in unterschiedlichen Längen von 0,50 m bis 4,00 m erhältlich.

Cod. art. 301010500

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Cod. art. 301270000

The base collar with a single rosette is placed on the base jack and forms an easy base for the rest of the scaffold. The base collar makes the alignment of a modular structure easier.

Cod. art. 301280000

The Leg lock, used in pairs, is designed to attach to the bottom rosette of the top Standard and to the top rosette of the bottom Standard. This joins the standards together in preparation for suspended or lifted scaffold applications.

Cod. art. 335040000

Spigots for hanging scaffolds are necessary for connecting standards without spigots in suspended scaffolds (2 bolt axis per connection).