Dimensionally stable solid-web beam with three-ply web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.-nr. 002

Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.-nr. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Note: For fast shipping, currently only available in the sizes 2,9m 3,9m and 4,9m

Art.-nr. 004

Der bewährte Schalungsträger in Vollwandkonstruktion

Hochwertig, beständig, widerstandsfähig – Der Doka-Träger H20 eco P ist ein formstabiler Vollwandträger mit einem Steg aus Spezial-Flachpressplatte und bewährter Endverstärkung durch Abschrägung der Trägerenden und zusätzlichem Kunststoffniet im Trägergurt. Der Träger kann in Wand- und Deckenschalungssystemen eingesetzt werden.

Bitte beachten Sie, das es aufgrund von erhöhter Nachfrage zu Lieferengpässen kommen kann und sich dadurch die Lieferzeiten verlängern können.

Art.-nr. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-nr. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-nr. 007

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-nr. 009

High-grade plywood sheet made of Nordic birch with 120 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-nr. 015

High-grade plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-nr. 016

High-grade plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-nr. 017

Plywood sheet made of European poplar with 120 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Art.-nr. 023

EN 1065-compliant telescopic construction prop, made of steel.

Art.-nr. 024

EN 1065-compliant telescopic construction prop, made of steel.

Art.-nr. 026

Self-cleaning threadbar

Art.-nr. 030

Expendable form-tie distance tube for retrievable form ties at waterproof form-tie points.

Art.-nr. 031

Self-cleaning threadbar

Art.-nr. 033

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Art.-nr. 035

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Art.-nr. 036

Forming right-angled outside corners, stop-ends and column formwork.

Art.-nr. 037

Forming right-angled inside corners.

Art.-nr. 038