The tried-and-tested formwork beam in solid-web design

High-quality, hard-wearing, durable – The Doka beam H20 eco P is a dimensionally stable solid wall beam with a web made of special flat-pressed sheet and proven end-reinforcement by bevelling the beam ends and an extra plastic rivet in the beam chord. The beam can be used in wall and slab formwork systems.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 005

The high-performance quality sheet for special requirements and many uses

The Doka formwork sheet 3-SO is a high-grade three-ply solid-wood sheet with urea-melamine resin coating on both sides for horizontal and vertical formwork applications. It offers first-class concrete results due to selected wood quality and excellent surface finishing.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 007

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 009

High-grade plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-No. 017

The robust birch plywood sheet for smooth exposed concrete surfaces

DokaPly Birch DC 21mm is a birchwood-veneer plywood sheet with 220 g/m² film coating on both sides, for horizontal and vertical formwork applications subject to ultra-high requirements for the concrete surfaces.

Art.-No. 022

DokaPly eco is a sustainable European poplar plywood sheet as a lightweight alternative specially for use in vertical formwork for concrete.

Art.-No. 023

The extra long-lived floor prop with impact protector

The robust and long-lived Eurex 20 top floor prop impresses with a high minimum load capacity of 20 kN and complies with prop classes D, B/D or C/D in accordance with standard EN 1065. The integrated impact protector reliably protects the outer tube from mechanical damage and significantly increases the life span of the tubular steel prop.

Art.-No. 024

Telescopic steel prop.

Art.-No. 027

Self-cleaning threadbar

Art.-No. 029

Framed panel with Xlife sheet for craneless forming.

Aufgrund erhöhter Nachfrage kann es  derzeit zu verlängerten Lieferzeiten kommen.

Art.-No. 056

Forming right-angled outside corners, stop-ends and column formwork.

Art.-No. 057

Forming right-angled inside corners.

Art.-No. 058

Forming right-angled outside corners.

Art.-No. 059

Forming acute-angle and obtuse-angle outside corners.

Art.-No. 060

Bracing gangforms, infills and corners and forming stop-ends.

Art.-No. 075

Art.-No. 583012000

Storage and transport device for small items

Art.-No. 580470000

Erecting safety railings at exposed outer edges.

Art.-No. 580914000

Pressure sprayer for Doka release agents.

Art.-No. 583011000

Storage and transport device for small items