Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.-No. 003

The tried-and-tested formwork beam in solid-web design

High-quality, hard-wearing, durable – The Doka beam H20 eco P is a dimensionally stable solid wall beam with a web made of special flat-pressed sheet and proven end-reinforcement by bevelling the beam ends and an extra plastic rivet in the beam chord. The beam can be used in wall and slab formwork systems.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 007

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Art.-No. 022

EN 1065-compliant telescopic construction prop, made of steel.

Art.-No. 024

EN 1065-compliant telescopic construction prop, made of steel.

Art.-No. 026

Self-cleaning threadbar

Note: For fast shipping, currently only available in the sizes 1,25m

Art.-No. 029

Self-cleaning threadbar

Art.-No. 030

Bracing gangforms, infills and corners and forming stop-ends.

Art.-No. 075

Art.-No. 580470000

Erecting safety railings at exposed outer edges.

Art.-No. 581964000

Connector in use with anchor plates and tie rods.

Art.-No. 581966000

Connector with captive support plate used with tie rods.

Art.-No. 586148000

Supporting side formwork of drop beams and slab stop-ends.

Art.-No. 586149000

In combination with Beam forming support 20, adapting to the height of drop beams and slab stop-ends.

Art.-No. 586170000

Floor-prop head for supporting and stabilising Doka formwork beams.

Art.-No. 586174000

Floor-prop head for supporting and stabilising Doka formwork beams, with integral quick-lowering feature.

Art.-No. 586179000

Securing intermediate props to prevent toppling.

Art.-No. 586182000

Aid for working with Doka formwork beams in the floor formwork system during forming up and stripping out operations.

Art.-No. 588180000

For sealing off the unneeded anchoring sleeves in the frame profile.

One package contains 100 pieces.