Art.-nr. 306010600

The base jack is used to adjust the height of the scaffold. For base jack 60cm height adjustability is 40 – 450 mm.

Art.-nr. 301013000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Art.-nr. 301012000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Art.-nr. 301011000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Art.-nr. 301010500

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Art.-nr. 301270000

The base collar with a single rosette is placed on the base jack and forms an easy base for the rest of the scaffold. The base collar makes the alignment of a modular structure easier.

Truss ledgers have the same function as the normal ledgers: They are used as horizontals to connect standards, to transfer loads from platforms into standards and for making side protection of the scaffold. But due to reinforced design, they are able to transfer higher loads than normal ledgers. Double ledgers are available in lengths 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-nr. 527

The bracket is used to create an extended platform outside the scaffold and to add a "cantilever" to the construction. Brackets are available in lengths 0.39m, 0.73m and 1.09m.

Art.-nr. 543

Riegel werden als horizontale Verbindungen zwischen Stielen und zur Übertragung von Lasten von Belägen auf Stiele verwendet. Riegel werden auch für den Seitenschutz des Gerüstes verwendet. Riegel sind in den Längen 0,15 m, 0,39 m, 0,73 m, 1,04 m, 1,09 m, 1,40 m, 1,57 m, 2,07 m, 2,57 m und 3,07 m erhältlich.

Art.-nr. 549

Stahlbeläge werden verwendet, um eine Arbeitsplattform in einem Gerüst zu schaffen. Sie werden direkt auf die Riegel aufgesetzt und mit der integrierten Aushebesicherung gesichert. Stahlbeläge sind in zwei Breiten 0,19 m und 0,32 m und in den Längen 0,73 m, 1,09 m, 1,40 m, 1,57 m, 2,07 m, 2,57 m und 3,07 m erhältlich.

Art.-nr. 559

Steel toe boards are mounted on working platforms to prevent material from falling down. These Toeboards are galvanized and not yellow.

Art.-nr. 561

Verstrebungen sind unerlässlich, um die vertikale Steifigkeit des Gerüsts zu erhöhen! Zur Stabilisierung der äußeren Gerüstebene, parallel und senkrecht zur Fassade, werden Vertikalstreben verwendet. Vertikalstreben werden mindestens in jedem 5. Feld eines jeden Gerüstes und in jedem Endfeld senkrecht zur Fassade angebracht. Die Diagonalen sind für Höhen von 1,00 m, 1,50 m und 2,0 m sowie für Feldlängen von 0,73 m, 1,09 m, 1,40 m, 1,57 m, 2,07 m, 2,57 m und 3,07 m erhältlich.

Art.-nr. 574