Framax eco | Framed formwork | Wall Formwork | Doka Switzerland

Framax universal waling

Bracing gangforms, infills and corners and forming stop-ends.

Art.-No. 041

One package contains 1 pieces.

Scaffold tube 48.3mm

Steel tube with wall thickness of 3.2 mm.

Art.-No. 042

One package contains 1 pieces.

Framax fitting timber

Closure between the panels.

Art.-No. 044

One package contains 1 pieces.

Framax moulded timber

Closure between the panels for formwork-sheet thickness 21 mm.

Art.-No. 045

One package contains 1 pieces.

Handrail clamp S

Art.-No. 580470000

Erecting safety railings at exposed outer edges.

One package contains 1 pieces.

Tie-rod wrench 15.0/20.0

Art.-No. 580594000

Turning and holding tie rods.

One package contains 1 pieces.

Hexagon nut 20.0

Art.-No. 581420000

Connector in use with anchor plates and tie rods.

One package contains 1 pieces.

Super plate 20.0 B

Art.-No. 581424000

Connector with captive support plate used with tie rods.

One package contains 1 pieces.

Plastic tube 26mm 2.00m

Art.-No. 581463000

Expendable form-tie distance tube for retrievable form ties.

One package contains 1 pieces.

Plastic tube 22mm 2.50m

Art.-No. 581951000

Expendable form-tie distance tube for retrievable form ties.

One package contains 1 pieces.

Plug 22mm

Art.-No. 581953000

Closing plastic tubes left in the concrete.

One package contains 1,000 pieces.

Wing nut 15.0

Art.-No. 581961000

Connector in use with anchor plates and tie rods.

One package contains 1 pieces.

Hexagon nut 15.0

Art.-No. 581964000

Connector in use with anchor plates and tie rods.

One package contains 1 pieces.

Super plate 15.0

Art.-No. 581966000

Connector with captive support plate used with tie rods.

One package contains 1 pieces.

Framax universal fixing bolt 10-25cm

Art.-No. 583002000

Panel connection in the outside corner and with column formwork and for attaching universal walings, for example, and other parts to the formwork.

One package contains 1 pieces.

Handrail post 1.10m

Art.-No. 584384000

Fall protection on the structure.

One package contains 1 pieces.

Framax clamping bolt 4-8cm

Art.-No. 588107000

For securing the foundation clamp to the panel.

One package contains 1 pieces.

Framax frontal triangular ledge 2.70m

Art.-No. 588129000

Triangular ledge with soft plastic lips for close fit to the surface of the panel. Used for making no-nails outside corners and column formwork with universal panels.

One package contains 1 pieces.

Framax foundation clamp 0.90m

Art.-No. 588141000

For tying panels set longside horizontal (foundation formwork). The upper form-tie can then be placed above the top edge of the formwork.

One package contains 1 pieces.

Framax stop-end tie

Art.-No. 588143000

Forming stop-ends.

One package contains 1 pieces.