Dimensionally stable solid-web beam with three-ply web and PUR beam-end reinforcement. (EN 13377-compliant)

Št. art. 002

Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

Št. art. 003

The tried-and-tested formwork beam in solid-web design

High-quality, hard-wearing, durable – The Doka beam H20 eco N is a dimensionally stable solid wall beam with a three-ply sheet web and proven end-reinforcement by bevelling the beam ends and an extra plastic rivet in the beam chord. The beam can be used in wall and slab formwork systems.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Št. art. 004

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Št. art. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Št. art. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Št. art. 007

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Z CENA -   42,23  € / m²z

Št. art. 008

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Št. art. 022

EN 1065-compliant telescopic construction prop, made of steel.

Št. art. 024

EN 1065-compliant telescopic construction prop, made of steel.

Št. art. 025

EN 1065-compliant telescopic construction prop, made of steel.

Št. art. 026

Self-cleaning threadbar

Št. art. 029

Self-cleaning threadbar

Št. art. 030

Steel tube with wall thickness of 3.2 mm.

Št. art. 042

Grating for safety barriers on the formwork or on the structure.

Št. art. 043

Bracing gangforms, infills and corners and forming stop-ends.

Št. art. 075

Bracing load-bearing tower frames.

Št. art. 076

Infilling along edges and around columns.

Št. art. 079

For forming large floor areas.

Št. art. 082

Grille made up of primary and secondary beams with swivel heads, for sheeting with any formwork sheeting.

Št. art. 083