Art.-No. 729200220

Art.-No. 729200221

Dimensionally stable solid-web beam with three-ply web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.-No. 002

Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.-No. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Art.-No. 004

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Art.-No. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 007

The Formwork sheet 3S basic is a three-ply solid-wood sheet with urea-melamine resin coating on both sides for many different uses on construction sites.

Art.-No. 008

DokaPly Birch is a birchwood-veneer plywood sheet with film coating on both sides, for horizontal and vertical formwork applications.

Art.-No. 022

Doka floor props Eurex 20 top are adjustable telescopic steel props that conform to EN 1065.
They are designed for use as vertical props for temporary structures.

Art.-No. 024

Die extra-langlebige Deckenstütze mit Schlag-Protektor

Die robuste und langlebige Deckenstütze Eurex 30 top überzeugt mit einer hohen Mindesttragkraft von 30 kN und entspricht der Stützenklasse C/E nach Norm EN 1065. Der integrierte Schlagprotektor schützt das Ständerrohr verlässlich vor mechanischen Beschädigungen und erhöht die Lebensdauer der Stahlrohrstütze signifikant.

Art.-No. 025

EN 1065-compliant telescopic construction prop, made of steel.

Art.-No. 026

Steel tube with wall thickness of 3.2 mm.

Art.-No. 042

Grating for safety barriers on the formwork or on the structure.

Art.-No. 043

Bracing gangforms, infills and corners and forming stop-ends.

Art.-No. 075

Bracing load-bearing tower frames.

Art.-No. 076

Infilling along edges and around columns.

Art.-No. 079

For forming large floor areas.

Art.-No. 082

Grille made up of primary and secondary beams with swivel heads, for sheeting with any formwork sheeting.

Art.-No. 083