Der Holzschalungsträger H20 top ist ein Vollwandträger gemäß EN 13377 mit innovativer Endverstärkung aus Polyurethan für erhöhte Widerstandsfähigkeit gegen mechanische Beanspruchungen.

Art.-No. 002

Der Holzschalungsträger H20 top ist ein Vollwandträger gemäß EN 13377 mit innovativer Endverstärkung aus Polyurethan für erhöhte Widerstandsfähigkeit gegen mechanische Beanspruchungen.

Art.-No. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Art.-No. 004

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Art.-No. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 007

Die preiswerte Dreischichtplatte für alle Standardanwendungen

Die Schalungsplatte 3S basic 21mm ist eine Dreischicht- Massivholzplatte mit beidseitiger Harnstoff-Melaminharzbeschichtung für den vielfältigen Baustelleneinsatz, die für mehrmaligen Einsatz geeignet ist. Weniger Kosten für Nacharbeiten entstehen aufgrund hoher Maß- und Winkelgenauigkeit.

Aufgrund erhöhter Nachfrage kann es derzeit zu verlängerten Lieferzeiten kommen.

Art.-No. 008

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 009

High-grade plywood sheet made of Nordic birch with 120 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-No. 015

High-grade plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-No. 017

High-grade plywood sheet made of Nordic birch with polypropylene coating on both sides, on the concrete facing side with glass-fibre reinforcing. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 2-component edge protection varnish.

Art.-No. 018

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Art.-No. 019

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Anzahl Lagen: 15

Art.-No. 022

The extra long-lived floor prop with impact protector

The robust and long-lived Eurex 20 top floor prop impresses with a high minimum load capacity of 20 kN and complies with prop classes D, B/D or C/D in accordance with standard EN 1065. The integrated impact protector reliably protects the outer tube from mechanical damage and significantly increases the life span of the tubular steel prop.

Art.-No. 024

The Doka Floor prop Eurex 30 top has an integrated impact protector (except for length 550) for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 30 kN at any extension length and corresponds to prop class C/E according to EN 1065.

Art.-No. 025

The Doka floor prop Eurex 20 eco offers consistently high load capacity of at least 20 kN at any extension length and combines this with particularly easy and safe handling. As a steel floor prop of class B/D according to EN 1065, it is versatile and flexible for all common applications.

Art.-No. 026

Floor prop for heavy slab loads.

Art.-No. 028

Self-cleaning threadbar

Art.-No. 029

Self-cleaning threadbar

Art.-No. 030

Expendable form-tie distance tube for retrievable form ties at waterproof form-tie points.

Art.-No. 031