Art.-No. 583060000

For stowing up to 3 slab sensors 2.0 or cable sensors 2.0 and accessories.

Art.-No. 581462000

Closing plastic tubes left in the concrete.

Art.-No. 581862000

Sealing form-tie points to meet fair-faced concrete requirements.

Art.-No. 583069000

-----PRELIMINARY----- (Text on NVR)Used for installing the Concremote cable sensor 2.0.

Art.-No. 589288000

For sealing the form-tie points in the concrete.

Art.-No. 829367163

Art.-No. 583009000

Storage and transport device for small items.

Stop end board of fibre concrete

Art.-No. 195

Prevents concrete from escaping at the form-tie point.

Art.-No. 212

Seals the formwork on the concrete side and prevents the concrete from bleeding.

Art.-No. 213

For supporting and aligning wall formwork.

Art.-No. 239

Triangular ledge with soft plastic lips for close fit to the surface of the panel. Used for making no-nails outside corners and column formwork with universal panels.

Art.-No. 260

Triangular ledge with soft plastic lips for close fit to the surface of the panel. Used for making no-nails outside corners and column formwork with universal panels.

Art.-No. 278

Connecting Scaffold tubes 48.3mm at any angle to the vertical tubes of load-bearing tower frames.

Art.-No. 341

Art.-No. 589164000

Can be pushed over the end face of the panel (no nails needed). With column formwork and for forming outside corners, it is used with the universal panel (integrated slot grid for universal fixing bolts).

Art.-No. 586646000

Storage and transport device for Protective barriers Z.

The sensor is for taking measurements on horizontal concrete components (bottom slab, floor slab, etc.).

Art.-No. 479

Measuring cable with three measuring points. The cable connects to the Concremote cable sensor and is cast into the concrete as a lost part.

Art.-No. 480

The cable sensor can be deployed for various applications depending on customer requirements. Concremote wall sensing unit or Concremote cable can be connected.

Art.-No. 481

The calibration box cube is for calibrating the type of concrete used and consists of 3 cube moulds 15x15x15 mm.

Art.-No. 482