Item no. 301270000

The base collar with a single rosette is placed on the base jack and forms an easy base for the rest of the scaffold. The base collar makes the alignment of a modular structure easier.

Item no. 301280000

The Leg lock, used in pairs, is designed to attach to the bottom rosette of the top Standard and to the top rosette of the bottom Standard. This joins the standards together in preparation for suspended or lifted scaffold applications.

Item no. 301311630

The Guardrail standards are used to create openings for access & egress and the ability to attach a Safety Gate.

Item no. 316080005

The inner guardrail is used to shield the inner side of a staircase tower. The inner guardrail suits for both stair lengths of 2.57m, 3.07m.

Item no. 335040000

Spigots for hanging scaffolds are necessary for connecting standards without spigots in suspended scaffolds (2 bolt axis per connection).

Item no. 307070100

The Castor Wheel is designed to provide mobility to a medium to large size scaffold tower allowing the tower to roll across a flat surface.

Item no. 589338000

Concrete cone for complete closure of the form-tie point.

Item no. 589149000

Integrable inter-panel connector for DokaXlight panels. Not a substitute for the standard Frami clamp.

Item no. 589148000

The DokaXlight adapter XP is used in combination with Protective gratings XP or guardrail boards for constructing safety railings on the opposing formwork with a tilt of 15°.

Item no. 589164000

Can be pushed over the end face of the panel (no nails needed). With column formwork and for forming outside corners, it is used with the universal panel (integrated slot grid for universal fixing bolts).

Item no. 589167000

Bracket for making a working platform for drop-in engagement on the formwork.

Item no. 586646000

Storage and transport device for Protective barriers Z.

The outer guardrail is used to shield the outer side of the staircase tower. Outer guardrails are available for stair lengths of 2.57m, 3.07m. The outer guardrail has a Swivel Wedge Terminal that allows to fix it to the rosette.

Item no. 455

Vertical stacking of a Supporting construction frame "Universal" with Attachable frame F 1.50m for formwork heights from 6.00 m to 8.00 m.

Item no. 458

Securing System ladder XS to column formwork.

Item no. 460

Horizontal repositioning of supporting construction frame units up to 6.00 m in height.

Item no. 461

The Gap filler plank is designed to span small openings in the Ringlock platform or between bays. They can also be used to overlap on circular scaffolds and perform the angular connection. They are fitted with a plastic plug that is supplied with them.

Item no. 468

Connecting plate for high-tensile connections between timber-beam formwork panels at closures.

Item no. 469

The sensor is for taking measurements on horizontal concrete components (bottom slab, floor slab, etc.).

Item no. 479

Measuring cable with three measuring points. The cable connects to the Concremote cable sensor and is cast into the concrete as a lost part.

Item no. 480