Item no. 829367163

Item no. 583009000

Storage and transport device for small items.

Stop end board of fibre concrete

Item no. 195

Prevents concrete from escaping at the form-tie point.

Item no. 212

Seals the formwork on the concrete side and prevents the concrete from bleeding.

Item no. 213

For supporting and aligning wall formwork.

Item no. 239

Triangular ledge with soft plastic lips for close fit to the surface of the panel. Used for making no-nails outside corners and column formwork with universal panels.

Item no. 260

Triangular ledge with soft plastic lips for close fit to the surface of the panel. Used for making no-nails outside corners and column formwork with universal panels.

Item no. 278

Connecting Scaffold tubes 48.3mm at any angle to the vertical tubes of load-bearing tower frames.

Item no. 341

Item no. 589164000

Can be pushed over the end face of the panel (no nails needed). With column formwork and for forming outside corners, it is used with the universal panel (integrated slot grid for universal fixing bolts).

Item no. 586646000

Storage and transport device for Protective barriers Z.

The sensor is for taking measurements on horizontal concrete components (bottom slab, floor slab, etc.).

Item no. 479

Measuring cable with three measuring points. The cable connects to the Concremote cable sensor and is cast into the concrete as a lost part.

Item no. 480

The cable sensor can be deployed for various applications depending on customer requirements. Concremote wall sensing unit or Concremote cable can be connected.

Item no. 481

The calibration box cube is for calibrating the type of concrete used and consists of 3 cube moulds 15x15x15 mm.

Item no. 482

The box-out block for more safety on construction sites.

Item no. 550

Item no. 643

Item no. 644

Item no. 586629000

For use of the DokaRex alignment strut as panel strut with bottom outrigger.

Item no. 586630000

For connecting the Prop head EB to the DokaRex alignment strut.