The Ladder Hatch Plank acts as a lightweight, extra wide Scaffold Plank which incorporates a hatch.

Réf. 722

Steel tube with wall thickness of 3.2 mm.

Réf. 042

Réf. 582560000

For connecting two Scaffold tubes 48.3mm at any angle.

Réf. 582680000

Making anchorages to secure the stair tower to the building.

Réf. 682004000

For connecting two Scaffold tubes 48.3mm at an angle of 90°.

Réf. 338191500

Le tube d'ancrage au voile est conçu de manière pouvoir être fixé sur un tube d'échafaudage et se raccorde sur une structure porteuse. Il est disponible en 1,00 m et 1,50 m.

Réf. 338191000

Le tube d'ancrage au voile est conçu de manière pouvoir être fixé sur un tube d'échafaudage et se raccorde sur une structure porteuse. Il est disponible en 1,00 m et 1,50 m.

Réf. 328460600

Le vérin de tête est prévu pour le montage sur le dessus d'un échafaudage. Cela concerne notamment les applications dans lesquelles des poutrelles doivent être supportées. En variante, le vérin de tête peut également être employé à la base de l'échafaudage en le retournant.

Réf. 328450600

Le vérin de tête en croix est prévu pour le montage sur le dessus d'un échafaudage, en particulier pour l'utilisation dans l'étaiement où une ou plusieurs poutrelle(s) doivent être supportées.

Réf. 319022575

Le planchon à trappe alu 257 cm sert de trappe d'échafaudage légère et extra large avec échelle intégrée. Il n'est disponible qu'en 2,57m.

Réf. 316053075

The inner guardrail extended is used to shield the inner side of a staircase tower at the exit providing a guardrail at landing bay. Available for stair lengths of 2.57m and 3.07m.

Réf. 316052575

The inner guardrail extended is used to shield the inner side of a staircase tower at the exit providing a guardrail at landing bay. Available for stair lengths of 2.57m and 3.07m.

Réf. 316013075

The stairs are used to provide access to the various deck levels within the scaffold. The aluminum platform stairs are suitable for 2.00 kN/m² (EN12811: class 3). Alu-stairways are available in lengths of 2.57m, 3.07m.

Réf. 315082075

The Stair stringer is the diagonal member of the 10 Leg Stair System. The Stringer must be used in pairs in order of supporting the stair treads. The Stringer is used for a typical 2.0m lift height.

Réf. 315072075

The Stair stringer is the diagonal member of the 10 Leg Stair System. The Stringer must be used in pairs in order of supporting the stair treads. The Stringer is used for a typical 2.0m lift height.

Réf. 315020890

The Stair tread is designed as the horizontal member connecting to the Stair stringers, providing the steps of the stair system. This fits into a 1.036m (1.04m) Bay width.

Réf. 306030780

The Swivel base jack is used as a starting base for a scaffold. It is adjustable in height and angle to allow for compensation on uneven surfaces so that a level scaffold is always attainable.

Réf. 306010600

The base jack is used to adjust the height of the scaffold. For base jack 60cm height adjustability is 40 – 450 mm.

Réf. 301793000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Réf. 301792500

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds