Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

N.º art. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

N.º art. 004

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

N.º art. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

N.º art. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

N.º art. 007

The inexpensive three-layer sheet for all standard applications

The Formwork sheet 3S basic is a three-ply solid-wood sheet with urea-melamine resin coating on both sides for many different uses on construction sites, which is suitable for repeated use. Less reworking costs are incurred due to high dimensional and angular accuracy.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

N.º art. 008

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

N.º art. 022

The Doka Floor prop Eurex 20 top has an integrated impact protector for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 20 kN at any extension length and corresponds to prop class D, B/D or C/D according to EN 1065.

N.º art. 024

The extra long-lived floor prop with impact protector

The robust and long-lived Eurex 30 top floor prop impresses with a high minimum load capacity of 30 kN and complies with prop classes C/E in accordance with standard EN 1065. The integrated impact protector reliably protects the outer tube from mechanical damage and significantly increases the life span of the tubular steel prop.

N.º art. 025

The floor prop with high load capacity and safe handling

The tested quality prop Eurex 20 eco from Doka is characterised by a high minimum load capacity of 20 kN and corresponds to prop class B/D in accordance with standard EN 1065. The steel props also impress with their simple and safe handling and their impressive price-performance ratio.

N.º art. 026

Self-cleaning threadbar

N.º art. 029

Self-cleaning threadbar

N.º art. 030

Steel tube with wall thickness of 3.2 mm.

N.º art. 042

Grating for safety barriers on the formwork or on the structure.

N.º art. 043

Bracing gangforms, infills and corners and forming stop-ends.

N.º art. 075

Bracing load-bearing tower frames.

N.º art. 076

Infilling along edges and around columns.

N.º art. 079

For forming large floor areas.

N.º art. 082

Grille made up of primary and secondary beams with swivel heads, for sheeting with any formwork sheeting.

N.º art. 083

Post for safety barriers on the formwork or on the structure.

N.º art. 089