Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Art.-No. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 007

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 008

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 009

EN 1065-compliant telescopic construction prop, made of steel.

Art.-No. 026

Telescopic steel prop.

Art.-No. 027

Self-cleaning threadbar

Art.-No. 029

Self-cleaning threadbar

Art.-No. 030

Art.-No. 581448000

Tightening and loosening cone screws.

Art.-No. 586232000

Making a side stop-end on the slab formwork.

Expendable form-tie component for single-sided tying.

Art.-No. 116

Art.-No. 588651000

Telescopic tool for operating the Framax lifting hook from ground level.

Art.-No. 069431

Telescopic steel prop.

Art.-No. 161

Dimensionally stable solid-web beam with fibreboard web and bevelled beam-ends (complies with EN 13377).

Art.-No. 162

Turning and holding tie rods.

Art.-No. 202

Weld-on socket for force-transmitting connection between tie rods.

Art.-No. 204

Plywood sheet made of Nordic birch with 120 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Art.-No. 229

Triangular ledge with soft plastic lips for close fit to the surface of the panel. Used for making no-nails outside corners and column formwork with universal panels.

Art.-No. 260