Dimensionally stable solid-web beam with three-ply web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.-nr. 002

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Art.-nr. 004

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-nr. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-nr. 007

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-nr. 008

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-nr. 009

High-grade plywood sheet made of Nordic birch with polypropylene coating on both sides, on the concrete facing side with glass-fibre reinforcing. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 2-component edge protection varnish.

Art.-nr. 018

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Art.-nr. 019

EN 1065-compliant telescopic construction prop, made of steel.

Art.-nr. 024

EN 1065-compliant telescopic construction prop, made of steel.

Art.-nr. 025

EN 1065-compliant telescopic construction prop, made of steel.

Art.-nr. 026

Floor prop for heavy slab loads.

Art.-nr. 028

Self-cleaning threadbar

Aviso: Para envío rápido, actualmente solo disponibles en las medidas 1,25m

Art.-nr. 029

Self-cleaning threadbar

Art.-nr. 030

Expendable form-tie distance tube for retrievable form ties at waterproof form-tie points.

Art.-nr. 031

Self-cleaning threadbar

Art.-nr. 032

Self-cleaning threadbar

Art.-nr. 033

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Art.-nr. 035

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Art.-nr. 036

Forming right-angled outside corners, stop-ends and column formwork.

Art.-nr. 037